Mars aqua cable management.

[fLajNuT]

Looking for suggestions on managing the mars aqua cables so they don’t look so ugly. See pic below for my setup.

 

[Jon Fishman]

You could mount a power-strip on the wall behind the tank and make a box covered with stretched fabric/canvas to cover it and run the cables into that with notches out of the box

 

[fLajNuT]

You could mount a power-strip on the wall behind the tank and make a box covered with stretched fabric/canvas to cover it and run the cables into that with notches out of the box

So I will be adding 2 surge bars behind the tank for all my equipment. Not able to picture what you are talking about. Do you have a picture of something similar?

 

[Jon Fishman]

Not sure how to describe it..... A shadow-box hung backwards..... or an acoustic bass trap.

 

[Dragon52]

You could use something like this based on the size you need.

Kable Kontrol® Convoluted Black Split Wire Loom Tubing - 1/4" to 3-1/2" Diameter

Order convoluted wire loom by the foot in diameters ranging from 1/4 to 3-1/2 inches. This black split wire loom tubing is resistant to fluids and chemicals.

www.cabletiesandmore.com

 

[homer1475]

What I did with mine was to splice the 2 wires into one. That way you only have 1 plug for each light instead of 2. I then ran the remaining 2 wires inside of a plastic wire conduit. Kept them nice, compact, and neat.

 

[Reef AquaCult]

I would fish the wires through your dry wall down to outlet. Plenty of YouTube videos show how to it,it’s not that bad