PROFILUX 4

ReefRocker · Nov 1, 2016

@Regg Much easier. With the GHL, there is no need to learn programming codes. Profilux uses dropdown boxes from a list of menus and offer Programmable logic if you need it. Take a look at their startup guide for a taste of the programming logic used by the Profilux.

Matthias Gross · Nov 2, 2016

reefwiser said:
Not seeing how different the P4 is to the P3 other than form factor smaller and WiFi built in.

hm ....
More built-in ports, switchable pH/Redox inputs, 3rd expansion slot (internal), Mitras Lightbar Interface, RGB status indicator (illuminated GHL logo on top), new hardware architecture and a few other things.
Read all details here:
https://www.aquariumcomputer.com/products/profilux-aquarium-controller/profilux-4/

reefwiser · Nov 2, 2016

Thanks Matthias

cbear44 · Nov 2, 2016

Matthias and other wise ones with Profilux experience.

I'm trying to make my decision between the Profilux 4 (Mega set probably) and other options out there. I looked at the PDF guide for the Profilux 3 but I'm still don't have a complete understanding the interface, work flows, how the GHL web interface works on a day to day basis.

Sadly not much on Youtube or other Internet video sources on how to use the Profilux 3. In particular I'm interested in how the monitoring graph sheets look, how the app works (I downloaded the app but can't access anything obviously) and any other programming basics.

Can anyone help with either screen shots or a video of their Profilux 3 interface/App? This would really help me get a better sense of how the GHL family of controllers would fit with my work flow and system.

reefwiser · Nov 3, 2016

I am working up a look at the GCC control center app will have it up soon. I will be an introduction just to show you around the application.
Will be making more videos as time goes by.

Cyclist · Dec 16, 2016

Hello all,
Can the Profilux 4 control AI Hydra HD lights? Radion G4's, or Vortech pumps?

Matthias Gross · Dec 17, 2016

Hi

yes, like the ProfiLux 3 it can control Vortech pumps with the Vortech Controller.

And no, it can't control AI or Radion.

Therefore it can control all Mitras LED lights from GHL, e.g. the Mitras LX6 and LX7 over a wireless connection:
https://www.aquariumcomputer.com/products/ghl-illumination/mitras-lx-7000-series/

Cyclist · Dec 17, 2016

Ok, thanks for the reply.
Do you think that GHL might work with other companies to bring this capability to their unit?
Not sure if they are in competition with Neptune Systems, but I am sure GHL users would benefit from these added features.

reefwiser · Dec 18, 2016

Cyclist this a Ecotech issue they are the ones that allow companies to use their IP. They have not let anyone control their new D.C.pump.

FFFishy · Dec 18, 2016

Can anyone comment as to the reliability / consistency of Conductivity / Salinity measurements with ProfiLux equipment ? How do air bubbles near the probe and electrical 'noise' affect the measurements ? I've got two Abyzz pumps in my sump and they seem to generate electrical interference when running.

Support@GHLUSA · Dec 18, 2016

FFFishy said:
Can anyone comment as to the reliability / consistency of Conductivity / Salinity measurements with ProfiLux equipment ? How do air bubbles near the probe and electrical 'noise' affect the measurements ? I've got two Abyzz pumps in my sump and they seem to generate electrical interference when running.

I cannot speak to the Abyzz pumps, but I run Royal Exclusiv RD3 return and skimmer pumps, and there are no issues, effecting the Conductivity probe/readings.

d2mini · Dec 18, 2016

I've got my skimmer's Mag pump right next to my probes and don't see any issues.
Once in a while when I do see shift, it usually means the probe got dirty.

Dumaurier7 · Dec 18, 2016

The level of performance GHL is at now , I don't think you'll have any issues, but the P4 hasn't begun to be shipped yet, you would be safer waiting for reviews of actual users.

Support@GHLUSA · Dec 18, 2016

Dumaurier7 said:
The level of performance GHL is at now , I don't think you'll have any issues, but the P4 hasn't begun to be shipped yet, you would be safer waiting for reviews of actual users.

There wouldn't be any difference between the P3/P4 conductivity performance

Cyclist · Dec 18, 2016

reefwiser said:
Cyclist this a Ecotech issue they are the ones that allow companies to use their IP. They have not let anyone control their new D.C.pump.

Actually it's both companies that need to be open with each other. Remember Apex and EchTech back and forth? Well from what I understand is they may have come to an agreement. I think.

FFFishy · Dec 18, 2016

Thank you Marco & Dennis . . . that's what I was hoping to hear. I'll wait until the P4 becomes available, then give it a try !
---Frank

Marco@GHLUSA said:
I cannot speak to the Abyzz pumps, but I run Royal Exclusiv RD3 return and skimmer pumps, and there are no issues, effecting the Conductivity probe/readings.

d2mini said:
I've got my skimmer's Mag pump right next to my probes and don't see any issues.
Once in a while when I do see shift, it usually means the probe got dirty.