I’ve settled on the Eflux style controllable pump. It goes with the app for my lights. I am just unsure if I should go with one pump that is controllable between 200 and 1050 gph or two 100 to 600 controllable pumps on opposing sides. My rank is 29 gallon tank. The smaller ones are rated for tanks up to 40 gallons I think and the lager one is rated for tanks up to 70 gallons.
Which wave maker size wave maker
- Thread starter GR00VY
- Start date
- Tagged users None
X-37B
Fight The Good Fight
I had two of the 2500 gph in my 18" cubed nano, 25 gallon. Ran them at 40% each on pulse.
They are now being used in my 36x24x12 frag tank.
You can turn them down and they are not that big
You cant turn up a lower powered pump if you need to. Plus if you upgrade down the road they can still be used.
Pretty decent pump.
Here is a pic I just took. I just put water in it this weekend.
Ok so the 1050 is what I should go with and then possible add a second, correct? Or would you recommend I go with the bigger ones?
Also, if I buy the pump kit does that come with cables to hook into my station that has my lights? I want to use the Bluetooth on my phone, not the controller.
nice looking tank btw
Also, if I buy the pump kit does that come with cables to hook into my station that has my lights? I want to use the Bluetooth on my phone, not the controller.
nice looking tank btw
X-37B
Fight The Good Fight
I would go with the 2100 but its up to you. You need the kit then all you need is another pump to slave to the unit. With the kit you can run 3 pumps if you wanted too.
You can not run the pump by itself as you neef the kit to plug it into.
Not sure about the light setup. The remote is simple to run.
Good luck its a good pump and system.
You can not run the pump by itself as you neef the kit to plug it into.
Not sure about the light setup. The remote is simple to run.
Good luck its a good pump and system.
