0.0 dKH with KHDirector

[CEReefer]

Hello everyone, since yesterday night my KHD is acting up, the first measurement was dKH of 317 (yes, you are reading it right), and since then measuring 0 each single time, the dosing heads are all working fine, the pH probe port is not leaking.
- The sampling line is in the water, the normal and emergency outlets are above water level, as usual
- I tried emptying the cell completely, flushing the cell, venting the internal reagent tube (from the app), and then retaking measurements, still 0.
- The pH probe is connected correctly to the KHDirector, the pH value changes while measuring (checked in the app).

Anyone has any suggestions?

 

[Billldg]

Hopefully this will help you. It has a section for 0.0 readings.

KH Director tips and troubleshooting - GHL Advanced Technology

www.aquariumcomputer.com

 

[Cali9dub]

Hello everyone, since yesterday night my KHD is acting up, the first measurement was dKH of 317 (yes, you are reading it right), and since then measuring 0 each single time, the dosing heads are all working fine, the pH probe port is not leaking.
- The sampling line is in the water, the normal and emergency outlets are above water level, as usual
- I tried emptying the cell completely, flushing the cell, venting the internal reagent tube (from the app), and then retaking measurements, still 0.
- The pH probe is connected correctly to the KHDirector, the pH value changes while measuring (checked in the app).

Anyone has any suggestions?

Make sure all your tubes are clear. Filter on the sample line is clean, no air bubbles in any of the lines, no pinholes in the pump head hoses, the drain line hasn’t become submerged or blocked.

 

[CEReefer]

Everything was fine, I just unplugged KHD and P4, replugged them, now they work like a charm..