0 Psi RODI

[DeepReefNoob]

Im not sure why but my BRS 4 stage RODI unit has completely stopped working, all the media/cartridges are pretty much new and just checked most of the major tubing, pulled out the media and placed it back in. I need to get this fixed ASAP because I don't have any saved water on hand since I live in an apartment.

 

[lapin]

If its not making good water then check to see if your flush valve is open if you have one. If thats not the issue then......
You start at the supply line and work thru the unit. Remove each tube as you go along. Make sure water goes from your faucet to the first canister. Then make sure it goes to the second.....ect

 

[mann1139]

Im not sure why but my BRS 4 stage RODI unit has completely stopped working

Define 'stopped working'. Is water coming out at all? How about through the waste port?

As lapin said, the best way to troubleshoot (after checking for something obvious like a valve being closed), is to work your way through the system.

 

[OceanMinded]

Edit: figured it out

 

[alain Bouchard]

Edit: figured it out

are you really gonna leave us hanging? :/

 

[homer1475]

are you really gonna leave us hanging? :/

Apparently.....

 

[SantaMonica]

Thought you had discovered a new 0 psi high tech unit that did not need pressure

 

[OceanMinded]

are you really gonna leave us hanging? :/

Sorry, this wasn’t my original thread. I had posted a comment saying “yeah jm
Not getting any PSI and it’s not filling with water”

but I realized I had the lines connected wrong. I had just replaced all my filters and took the unit out from under the sink.
But since I’m already here.

the changed the boiler in my apartment building. So once I fixed my RODI unit and started making water….the cold water turned into HOT water. Probably destroying my membrane. Hope everything else I JUST replaced is okay…

 

[SantaMonica]

Hot water into a membrane = ughhh