Kipp's Corals
Active Member
- Joined
- Jun 15, 2022
- Messages
- 238
- Reaction score
- 1,304
- Location
- Kinderhook
- What state or country do you live in
- New York
What is everyone’s average RODI gallons per hour?
00W's AIO Smorgasbord
- Reef Showcase
- Thread starter 00W
- Start date
- Tagged users None
kevgib67
10K Club member
At 80 psi it takes one and a half hours to produce 5 gallons.
Kipp's Corals
Active Member
- Joined
- Jun 15, 2022
- Messages
- 238
- Reaction score
- 1,304
- Location
- Kinderhook
- What state or country do you live in
- New York
Okay so I’m right on schedule. I did the math 100GPD. You’re correct it looks like it might be about a gallon short so 1.5 is what my unit is doing.
Figure I’d leave room to dump.
Excellent. Good day
My guess I’ll need just a little more filtration for my remaining 90ppm that my clean water is reading. Still confused about the RODI inline ppm reader
kevgib67
10K Club member
Maybe someone will chime in the inline ppm reader, equipment is not in my wheelhouse.
Calmwaters
2500 Club Member
- Joined
- Jan 25, 2024
- Messages
- 4,543
- Reaction score
- 34,222
- Location
- USA
- What state or country do you live in
- North Carolina
Such a rebel
tbrown
Nominated Cronie Intern - Might be failing?
Most of the year it works but my alkalinity is pretty high in the winter.
Calmwaters
2500 Club Member
- Joined
- Jan 25, 2024
- Messages
- 4,543
- Reaction score
- 34,222
- Location
- USA
- What state or country do you live in
- North Carolina
I would be terrified to use non-rodi water
OP
OP
00W
7500 Club Member
I just have a little ro buddie.I’m not the equipment guy but I knew I had to get my psi up so I purchased a booster. You might want to consider getting yours up.
Instructions say not over 35 psi it's just a flow through system from what I understand.
kevgib67
10K Club member
As I stated before, I’m not the fish disease or tech/equipment guy for sure.I did order a tds meter for it today just for fun after the posts about it.
Always learning.
You are the everything guy as far as I'm concerned.
fishguy242
Cronies..... INSERT BUILD THREAD BADGE HERE !!
Partner Member 2024
Reef Tank 365
Photo of the Month
Hospitality Award
Midwest Reefer
Fish Medic
R2R Secret Santa 2023
FIREBUG
best if inline meter probes are before "in" membrane and after "out" di canister
I run at 100 psi 150gpd membrane only get about 6 gal an hour
I run at 100 psi 150gpd membrane only get about 6 gal an hour
OP
OP
00W
7500 Club Member
Was working on my truck AGAIN when posting but you ARE the equipment man and right in this situation.
My house pressure is 38 when everything is running typo earlier of 28 from my big fat fingers and I just read the ro membrane and it says minimum 35 psi.
Brains are not my strong suit as you know so I am looking into a booster pump right now to make this thing more efficient.
Thank you @kevgib67 once again.
