1/2" OD versus ID..Reducer possible?

Falcar · Sep 18, 2019

Hey all:

I recently picked up a chaeto reactor to hook up to my AIO tank. It was listed as 1/2" barbed tubing. What I wanted to do was just T off of my BRS Carbon reactor, which uses 1/2" as well...But you've guessed it...that is 1/2" OD.

I'm trying to figure out what to do. I have pumps that do either 1/2" ID (MJ1200) and one that does 1/2" ID but I don't have room for two pumps. Can I use one or the other, but T into a reduction fitting so that I can handle both on one pump?

What would I need for this ? I'm new to pumping fixtures and such.

Thanks in advance!

Water Dog · Sep 18, 2019

You’ll need a 1/2”x1/2”x1/2” quick connect tee...

Mur-lok RO Tee Union Push Connect

Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Polypropylene construction NSF Standard 58 Certified Compatible with RO tubing

www.bulkreefsupply.com

Then a 1/2” tube x 1/2” barbed stem adapter...

Mur-lok Stem Adapter Tube x Hose Stem

Mur-lok Stem Adapter Tube x Hose Stem Stem side slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality...

www.bulkreefsupply.com

Falcar · Sep 19, 2019

Are those 1/2 ID or OD?

Water Dog · Sep 19, 2019

The stem adapter barbed part is for flexible 1/2” ID tubing (goes to your chaeto reactor), the tube part of that adapter is 1/2” OD that inserts into the Murlok 1/2” tee. The Murlok tee accepts 1/2” OD rigid RO type tubing that is compatible with your BRS media reactor.

DomiKasReef · Sep 19, 2019

Ideally it sounds like you want to go from 1/2" OD to 1/2" ID?
You'd probably have to make the fitting from a couple. US Plastic is probably a good start.

HERE you'll find a quick connect that should take your 1/2" OD and push connect
(like RO/DI line connectors).
Then you'll need to get a barb for the 1/2" ID side HERE .

Use some pipe dope/tephlon tape when connecting the 2 pieces together too.

If that's not exactly what you're looking for, I'm sure you can find what you need on that site too or even call them. They helped me "build" a fitting before too.

Falcar · Sep 19, 2019

DomiKasReef said:
Ideally it sounds like you want to go from 1/2" OD to 1/2" ID?
You'd probably have to make the fitting from a couple. US Plastic is probably a good start.

HERE you'll find a quick connect that should take your 1/2" OD and push connect
(like RO/DI line connectors).
Then you'll need to get a barb for the 1/2" ID side HERE .

Use some pipe dope/tephlon tape when connecting the 2 pieces together too.

If that's not exactly what you're looking for, I'm sure you can find what you need on that site too or even call them. They helped me "build" a fitting before too.

Wow this is a great site, I hadn't thought of making my own, looks like it would work really well.

Thank you!

Falcar · Sep 19, 2019

Water Dog said:
You’ll need a 1/2”x1/2”x1/2” quick connect tee...

Mur-lok RO Tee Union Push Connect

Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality American made fittings are constructed with FDA approved materials. Polypropylene construction NSF Standard 58 Certified Compatible with RO tubing

www.bulkreefsupply.com

Then a 1/2” tube x 1/2” barbed stem adapter...

Mur-lok Stem Adapter Tube x Hose Stem

Mur-lok Stem Adapter Tube x Hose Stem Stem side slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality...

www.bulkreefsupply.com

Thank you! I will take a look at these.

Water Dog · Sep 19, 2019

With my solution, if you wanted to use the MJ1200 feed pump, you’ll need an additional 1/2” stem adapter in order to connect the MJ1200 as a feed pump.

Water Dog · Sep 19, 2019

Or you can go with this 1/2” sch 80 barbed tee...

Schedule 80 Barbed Tee

Barb x Barb x Barb - PVC Barbed Tees for your plumbing needs. Use Schedule 80 Barbed Tees to connect flexible nylon tubing. More professional look than white Schedule 40 PVC. 5 PVC Pipe Sizes Available ½” Schedule 80 Barbed Tee connects ½” tubing ¾” Schedule 80 Barbed Tee connects ¾” tubing...

www.bulkreefsupply.com

Then a single 1/2” stem adapter to fit into the 1/2” push connect valve fitting that one’s with your BRS media reactor...

Mur-lok Stem Adapter Tube x Hose Stem

Mur-lok Stem Adapter Tube x Hose Stem Stem side slides into standard push connect fittings. Barb side is designed for flexible tubing like nylon or clear pvc. Mur-lok RO fittings are the only RO fittings that feature dual EPDM O-rings to ensure a straight leak free fit. These high quality...

www.bulkreefsupply.com

Falcar · Sep 19, 2019

nice, so i took some of the ideas and went to home depot. They didn't have female threaded so I came up with this (not glued or clamped yet). Any potential issues you can see?