1/2" return to match overflow? 60g breeder

[Bakedpwn]

So im building a peninsula 60 gallon breeder. I see that most overflows for that size are a round 800gph which will be fine.
I like the look and price of the Modular marine but it is 1/2" lines. will that be sufficient and can i match the return line as 1/2"?
I was thinking i could buy the 1200gph which has 3/4" lines.
i also was eyeballing the shadow overflow 3.0 which would span almost the whole width and has larger lines.

sump will be 40g breeder so plenty of room

 

[Peace River]

I like the choice of a 40breeder with a 60breeder display. Its a great size and there is plenty of potential for reuse if you decide to go a different direction (aka bigger ).

Based on my experience and opinion, I would go with the 1200gph overflow. While it may be oversized you will likely appreciate the buffer of extra capacity. Good luck with whatever you choose!

 

[Bakedpwn]

I like the choice of a 40breeder with a 60breeder display. Its a great size and there is plenty of potential for reuse if you decide to go a different direction (aka bigger ).

Based on my experience and opinion, I would go with the 1200gph overflow. While it may be oversized you will likely appreciate the buffer of extra capacity. Good luck with whatever you choose!

Yep. Im gonna get the 1200 for ten dollars more. Just better assurances. Im stoked for this tank!

 

[Vivid Creative Aquatics Verified Sponsor]

I would agree with @Peace River - if it fits, go with larger overflow. You can always dial it in with the ball valve if it outpaces your return pump, but you can't really do the same if it out paces your drain.