11F150's Reef Savvy Cube Build

[11f150]

awesome. let us know if you decide on any F&F wrasses. they are really cool fishes.

Oh I forgot to list the flame angel...Im going to get one but it will be one of the last ones I get.

 

[MarvinsReef]

Oh I forgot to list the flame angel...Im going to get one but it will be one of the last ones I get.

sounds good. FA I heard can be mean so great idea on adding him last.

 

[11f150]

sounds good. FA I heard can be mean so great idea on adding him last.

Yeah thats what I was thinking...If I put him in with an entire setup tank it might make him a bit timid.


Update: Just tested my water and I have ammonia from the shrimp now.

 

[skinz78]

The tank is looking great! I agree with Marvins suggestions on fish, you'll love the Chevron.

 

[11f150]

The tank is looking great! I agree with Marvins suggestions on fish, you'll love the Chevron.

Thanks I appreciate it

 

[MarvinsReef]

Yeah thats what I was thinking...If I put him in with an entire setup tank it might make him a bit timid.


Update: Just tested my water and I have ammonia from the shrimp now.

I think if he's one of the last ones in, he'll be fine.

 

[11f150]

Got a piece of equipment in today!

Just letting the tank cycle right now so not a lot going on. Heres a pic I took last night.

 

[11f150]

Here it is installed. Cant hardly even notice it when standing in front of the tank

 

[11f150]

Update: Nitrites have arrived!

 

[ReefPops]

I love the vortechs and it sounds like you like it to. See your cycle is coming along nicely which is always exciting.

 

[11f150]

I love the vortechs and it sounds like you like it to. See your cycle is coming along nicely which is always exciting.

Yeah so far I really like it. I read everywhere on some threads that people couldnt take the noise of it. I have it about half way up and also turned it all the way up a few times and I couldnt hear it at all over the overflow.

 

[ReefPops]

Yeah so far I really like it. I read everywhere on some threads that people couldnt take the noise of it. I have it about half way up and also turned it all the way up a few times and I couldnt hear it at all over the overflow.

Glad to hear you like it so far. I have the 10, but haven't ever had a problem with the noise. I keep my low, but the only time I could hear it was when an old one died. I replaced it (or part of it, I don't remember) and never had another issue. Most people I know seem to like them.

 

[mixer911]

Yeah so far I really like it. I read everywhere on some threads that people couldnt take the noise of it. I have it about half way up and also turned it all the way up a few times and I couldnt hear it at all over the overflow.

Matt, You may not have the overflow drains tuned correctly if the overflow is louder than the MP40. I ran MP40's on it and they were definitely louder than the overflow. The overflow should be virtually silent. Play with the ball valves on the drains. You should only have to adjust one side and let the other run full open.

 

[11f150]

Matt, You may not have the overflow drains tuned correctly if the overflow is louder than the MP40. I ran MP40's on it and they were definitely louder than the overflow. The overflow should be virtually silent. Play with the ball valves on the drains. You should only have to adjust one side and let the other run full open.

Yeah then I need to play with it because they both are wide open right now

 

[11f150]

Ok I was messing with the valves tonight to slow down the flow going down the overflow and I have it set just right. It was pretty crazy with the fine tuning I had to do with them. Little too much there was too much flow and too little the DT would start to fill faster than it was draining. It is very quiet right now and I do like it but it makes me nervous to how fine tuned it is. What if something were to get caught in the ball valve to restrict flow or algae clogs it a little when Im gone?

 

[wakeboardgeek]

Ok I was messing with the valves tonight to slow down the flow going down the overflow and I have it set just right. It was pretty crazy with the fine tuning I had to do with them. Little too much there was too much flow and too little the DT would start to fill faster than it was draining. It is very quiet right now and I do like it but it makes me nervous to how fine tuned it is. What if something were to get caught in the ball valve to restrict flow or algae clogs it a little when Im gone?

I always kill the power to simulate power outages to make sure I don't flood the house.

 

[dorky]

how u like ur led/t5 combo? what is ur bulbs color? im in the process of building one

 

[Dowtish]

Ok I was messing with the valves tonight to slow down the flow going down the overflow and I have it set just right. It was pretty crazy with the fine tuning I had to do with them. Little too much there was too much flow and too little the DT would start to fill faster than it was draining. It is very quiet right now and I do like it but it makes me nervous to how fine tuned it is. What if something were to get caught in the ball valve to restrict flow or algae clogs it a little when Im gone?

You could get something to clog your ball valve even when it's completely open. I don't think you need to be worried about that anymore now than before. Do you have overflow strainers that help keep things out of the plumbing?

 

[Alex27]

You have a great setup. I was wondering if you are worried about detritus buildup within the inner part of the rock structure. With the U shaped plan you may get a bit of build up in the middle. you can deter this with an extra pump or vortech. just wondering if you've thought of this.