120 Cube Flow

[Timrpn]

Trying to figure out my flow. I have 2 WAV pumps in my cube on either side of the overflow, but I am not sure it is enough, or if I just not configuring them right. I am using a Scheme in Apex by user werkkrew called 24hr WAV Primary SPS. I mostly have softies in there, but figured with the 3ftx3ft area that it has to push thru I need the power behind the pump. I just don't see the flow of the corals I want to see, there is no wav pattern of corals flowing back and forth. How does that happen? I also get some algae build up on the sand at the front and sides of the tank and under the WAV pumps at the back.

I am at work, but picture shows where the WAV pumps are.

 

[salt creap]

you should definitely be able to accomplish what your going for with those pumps -might hav to tinker with settings i would mount one 3/4 towards the top left side and the other 3/4 the way on the right, this is how most reefers mount pumps if you checkout any veteran healthy systems theyr almost always this way …set to blast for 3-4 sec and alternate between the two and you’ll get that swell sway