125 - Took Forever But Here It is!
- Build Thread
- Thread starter tbrown
- Start date
- Tagged users None
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Oh yeah, good news (I hope). I turned off the "spotlight" Noopsyche Mini V3 that was over my Judge Judy and Pink Cadillac. This morning, the Pink Cadillac was turning green so the color is coming back. Hopefully it's not too late for the Judge Judy Mille. I may have been overcooking them?
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
I have 0 controllers at this time beyond the doser and Inkbird heater controller.My next tank will have a controller, but I'm not set on which yet. Where are you on Hydros?
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
My pumps are WiFi because of the controllable plugs. Automated testing is more what I'd want the Neptune or something for.
stoney7713
10K Club member
- Joined
- Jul 30, 2022
- Messages
- 14,271
- Reaction score
- 25,897
- Location
- Salem
- What state or country do you live in
- Indiana
Umm de wife?
stoney7713
10K Club member
- Joined
- Jul 30, 2022
- Messages
- 14,271
- Reaction score
- 25,897
- Location
- Salem
- What state or country do you live in
- Indiana
Is it the mastertronic that you can setup with regular test kits? I was looking at it awhile back.
But yeah the Trident being tied to the Neptune in the end costs about the same.
stoney7713
10K Club member
- Joined
- Jul 30, 2022
- Messages
- 14,271
- Reaction score
- 25,897
- Location
- Salem
- What state or country do you live in
- Indiana
She actually likes them but can't tell you that for fear you would fill the master bath with fish too...
Stang67
KEEP CALM AND REEF ON
Partner Member 2024
Midwest Reefer
Reef Pumpkin Carver
Ohio Reefer
R2R Secret Santa 2023
My Tank Thread
- Joined
- Mar 26, 2019
- Messages
- 10,305
- Reaction score
- 48,647
- Location
- CLE
- What state or country do you live in
- Ohio
You give as much as you get tho.
Well not really or else you'd have nothing but you do share the love. With yourself mostly but sometimes others get to bask in your glowing generosity. Not often though. Forget it.
rmorris_14
TWSS
- Joined
- Nov 30, 2021
- Messages
- 8,826
- Reaction score
- 45,809
- Location
- Indiana
- What state or country do you live in
- Indiana
Sloppy seconds mmmmmmmmmmy brain always reads your name as steve cheeseburger... sorry not sorry
Slocke
I’m pedantic, ignore me
Excellence Award
Reef Tank 365
Photo of the Month
Article Contributor
My Tank Thread
My Aquarium Showcase
my brain always reads your name as steve cheeseburger... sorry not sorry
Steve Cheeseburger seems like a cool dude
Slocke
I’m pedantic, ignore me
Excellence Award
Reef Tank 365
Photo of the Month
Article Contributor
My Tank Thread
My Aquarium Showcase
But I think deep down Mr. Cheeseburger is really an introspective soul…
OP
OP
tbrown
Nominated Cronie Intern - Might be failing?
Edit to add TLDR:
If you don't want the long version, here's the short.
I messed up, fixed things, made adjustments, started printing again.
Ok... I mentioned it on another thread (sorry @Fish Styx or should I apologize to @BeanAnimal for pushing his thread to the top again?) but the 3D printer printed a blob into the nozzle. Got that all cleaned up and watched a few more YouTube videos. Leveled the bed per the directions given by Rick Impey (thanks for recommending this guy @stoney7713 !) and ran the auto level. THEN I saved the leveling settings and updated my Gcode to use those settings. Changed a couple of speed settings and temperature settings, made the adhesion type a skirt instead of a brim, updated my TweakAtZ plugin and started a print.
I think I still need to rerun a couple of calibration models but I want to change from the "free sample" Creality to the Sunlu that we purchased first. I'm printing 2 of these for my wife currently. Printed 3 Thursday night and the third failed and plugged up the nozzle.
If you don't want the long version, here's the short.
I messed up, fixed things, made adjustments, started printing again.
Ok... I mentioned it on another thread (sorry @Fish Styx or should I apologize to @BeanAnimal for pushing his thread to the top again?) but the 3D printer printed a blob into the nozzle. Got that all cleaned up and watched a few more YouTube videos. Leveled the bed per the directions given by Rick Impey (thanks for recommending this guy @stoney7713 !) and ran the auto level. THEN I saved the leveling settings and updated my Gcode to use those settings.
Changed a couple of speed settings and temperature settings, made the adhesion type a skirt instead of a brim, updated my TweakAtZ plugin and started a print.I think I still need to rerun a couple of calibration models but I want to change from the "free sample" Creality to the Sunlu that we purchased first. I'm printing 2 of these for my wife currently. Printed 3 Thursday night and the third failed and plugged up the nozzle.
billyocean
10K Club member
- Joined
- Feb 10, 2018
- Messages
- 33,813
- Reaction score
- 58,217
- Location
- Atlanta
- What state or country do you live in
- Georgia
It's official...Stevie Chee has arrived
Mschmidt
Average Maybe
Nativity scenes?Edit to add TLDR:
If you don't want the long version, here's the short.
I messed up, fixed things, made adjustments, started printing again.
Ok... I mentioned it on another thread (sorry @Fish Styx or should I apologize to @BeanAnimal for pushing his thread to the top again?) but the 3D printer printed a blob into the nozzle. Got that all cleaned up and watched a few more YouTube videos. Leveled the bed per the directions given by Rick Impey (thanks for recommending this guy @stoney7713 !) and ran the auto level. THEN I saved the leveling settings and updated my Gcode to use those settings.
I think I still need to rerun a couple of calibration models but I want to change from the "free sample" Creality to the Sunlu that we purchased first. I'm printing 2 of these for my wife currently. Printed 3 Thursday night and the third failed and plugged up the nozzle.
