28 Gallon Deep Blue Rimless SPS Reef

Sounds good, I'd be happy to. Do you think 20 pounds of rubble would be enough for both walls?

What are the dimensions of what you're covering? If you go the route of cutting the rock then each piece of rubble gets cut in half and can be used twice. However, you have to be really careful when doing this. You're cutting rocks so if you have a bad blade or wrong kind of blade then it can break which is obviously dangerous.
 
Please chronicle the making of wall! This seems the best way to make optimum use of space in a nano!

Another thing to consider is rock walls can cause nutrient issues with inadequate flow (just like any rock will with inadequate flow). since it's on the back, you may have to get creative with power head placement to avoid this. If the tank is sps dominate then there is probably going to be enough flow everywhere to prevent any sort of problem, just something to consider
 
What are the dimensions of what you're covering? If you go the route of cutting the rock then each piece of rubble gets cut in half and can be used twice. However, you have to be really careful when doing this. You're cutting rocks so if you have a bad blade or wrong kind of blade then it can break which is obviously dangerous.

My tank dimension are 20x20x16, and I'll be covering the back wall and overflow as well as one side wall. I doubt that I cut the rubble rock unless it is too large and would be an easy cut, but we shall see.
 
Another thing to consider is rock walls can cause nutrient issues with inadequate flow (just like any rock will with inadequate flow). since it's on the back, you may have to get creative with power head placement to avoid this. If the tank is sps dominate then there is probably going to be enough flow everywhere to prevent any sort of problem, just something to consider

That is definitely something to consider. My initial plan was to put one MP10 on the back wall towards the top right. My return pump lock line would be blowing out of the back wall towards the top left. I would think that would be adequate flow but I would always consider adding another MP10, though I'm not sure that would be needed.
 
That is definitely something to consider. My initial plan was to put one MP10 on the back wall towards the top right. My return pump lock line would be blowing out of the back wall towards the top left. I would think that would be adequate flow but I would always consider adding another MP10, though I'm not sure that would be needed.

I'm sure an MP 10 is enough, they move some serious water. I picked up 10 pounds the other day and here it is spread out and it fit 20x20 almost exactly. I didn't do anything to make it fit together here, I just dumped it on the ground, and nothing's been cut.

68596757c8f99419a7b301a9818b78d7.jpg
 
I'll probably pick up 25 pounds so I can cover both walls with no gaps. Also, anything left over will be used in the main aquascape that I plan to build.
 
I'll probably pick up 25 pounds so I can cover both walls with no gaps. Also, anything left over will be used in the main aquascape that I plan to build.

You definitely want to get more than you need so you have plenty to look through and find just the right piece for the right spot. Like you said, extra can end up in the display or in the sump
 
You definitely want to get more than you need so you have plenty to look through and find just the right piece for the right spot. Like you said, extra can end up in the display or in the sump

Completely agree! Thanks for all your help, I'll be sure to take progress photos throughout! This is going to be a great wall people, truly the best you've ever seen [emoji13]
 
If you use silicone make sure it's type I or something specially made for aquarium use. The type II has stuff in it to prevent mildew growth and stuff so it's not aquarium safe
 
Just as a little update, I've decided to hold off on constructing the wall for now because I want to use live rock for it and not dry.
 
Just as a little update, I've decided to hold off on constructing the wall for now because I want to use live rock for it and not dry.

That's tricky to do because silicone won't cure properly if both the rock and the tank aren't completely dry. If you want to make a wall with live rock you'd have to use a different adhesive
 
That's tricky to do because silicone won't cure properly if both the rock and the tank aren't completely dry. If you want to make a wall with live rock you'd have to use a different adhesive
I'm not using silicone since the tank dimensions are so small. My plan is to spray the foam directly on the glass and place the rocks directly onto the foam. I'll let it cure for 24-36 hours and then put water in it.
 
Then why make it live??

Save money and time and go with dead rock
 
Well I agree but if the live rock is out of water for to long it will die

Just use live sand and live rock for like the island or whatever and for the back wall use dead live rock this way ur not rushing to get the back wall done and end up taking longer to cycle the tank just my opinion

It's ur tank
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top