nmaragh18
Community Member
Ok... here we go again. 2nd attempt. I got some Caribsea Life Rock Shapes along with some Marco rocks. (I'm not particularly fond of the different colors but cost was a factor) . I only got a video so hopefully that helps.
2nd Attempt at AquaScape
- Thread starter nmaragh18
- Start date
- Tagged users None
Some plastic bundling strap and it will be very good. I do not know your aquariums height but IMO - it is wise to leave around 20 cm free water space between highest rock and water surface. Good place for some corals to grow on.
Sincerely Lasse
Sincerely Lasse
OP
OP
nmaragh18
Community Member
Hi Lasse,
Thank you for your recommendations. Can you please clarify what you mean by "Plastic Bundling Strap"? I am planning on using the Marco 400 Cement to secure things together.
jRatanak
Community Member
Definitely looks good! I'm personally a fan of having multiple smaller structures as opposed to one large one, especially cause it can be helpful from keeping fast growers from taking over everything haha something to consider depending on what you plan on keeping
OP
OP
nmaragh18
Community Member
Thank you jRatanak!
jRatanak
Community Member
of course! post any changes or other questions you might have, good luck!
Something like this Probably I got lost in translation - the Swedish name is "buntband" But please use UV resistant cable tie - there is an history how one of the public aquaria in Europe had use indoor cable tie. And it was a hugejob to repair that mistake
Sincerely Lasse
@Lasse comment about aquascape height is an important one. I've made the mistake before of building too high. A popular builder in the hobby told me (for SPS dominant tanks specifically) not to build much higher than 1/2 the water height. If you build to high, and corals grow out, here will be some of your problems:
- the bottom half of your tank will be shaded out; this is not a good visual.
- keeping adequate flow will be very difficult
- the corals will quickly reach the water line and struggle there
- unless the viewer is seated, they won't see your prized SPS corals up top
Solving for these issues is a pain. I had to run two gyres and 2 MP40s and still struggle with flow. Also had to change out my light to a much larger fixture to try and solve for shading.
- the bottom half of your tank will be shaded out; this is not a good visual.
- keeping adequate flow will be very difficult
- the corals will quickly reach the water line and struggle there
- unless the viewer is seated, they won't see your prized SPS corals up top
Solving for these issues is a pain. I had to run two gyres and 2 MP40s and still struggle with flow. Also had to change out my light to a much larger fixture to try and solve for shading.
OP
OP
nmaragh18
Community Member
Duly noted ScottB. Thank you for you insights
OP
OP
nmaragh18
Community Member
Thank you for clarifyingSomething like this Probably I got lost in translation - the Swedish name is "buntband" But please use UV resistant cable tie - there is an history how one of the public aquaria in Europe had use indoor cable tie. And it was a hugejob to repair that mistake
Sincerely Lasse
