300gal brute with sump above plumbing question

[dylanst.onge]

So I need to move my 120gal out of my parents house so I set up a temp tank its a 300g brute with a 40g breeder above it. I have a jebao 18k plumbed in the tub pumping up to the 40 and 2 1" drains and a 3rd emergency drain drilled in the side. It keeps up pretty good but is there a way to get the water flow through the drains better? Here are some pictures of tge set up again its only temporary for like 4 months maybe. Any help or criticism is welcome

 

[xxkenny90xx]

Are your drains not keeping up with the pump? Can you use a ball valve to slow the pump a bit?

 

[dylanst.onge]

I have the pump set to 75% and its keeping up just didn't know if there was a way to get the drains to drain faster lol

 

[SliceGolfer]

More drains, larger diameter pvc, less 90 degree bends, powerhead attached ahead of drain to push flow rate

 

[Spieg]

45* elbow will flow better than 90*.

 

[TDEcoral]

It looks like that pump is flowing waaaaay to much water through the sump. I've never had surface agitation like that in a sump.

 

[xxkenny90xx]

45* elbow will flow better than 90*.

Yes! Or better yet ditch the elbows all together and just bend the pvc. Or use some spa flex hose instead