32" Photon V2+ Availability
- Thread starter REPOWER
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
Hi,
No exact ETA just yet, we are waiting on our UPS tracking information to update. We have been told they are cleared through customs but no movement on the tracking we have just yet. Anywhere from 10-21 days at this time before we have the 16s and 32s in stock.
Anthony Scholfield
Valuable Member
Is it the same for the 24" too? Im wanting a 32" and 24"
150 Gallon Reef
Active Member
About how long until the 48s are in stock with you guys?
About 1-2 months. BRS will have them much sooner, likely by mid next week depending on when they process them into inventory.
24s are further out, 1-2 months at this time.
Anthony Scholfield
Valuable Member
Thanks for the info 
What size is your tank?Thanks for the info
Anthony Scholfield
Valuable Member
I have 2 i set up. A 36" 40b and a 24" x 20" 25gal lagoon.
I see! A 16 and a 32 would work great for your tanks, the 16 will cover your 25g lagoon well, they are great for 24" tanks. For the 40B, the 24 would work for a mixed reef, but the 32 is almost 2x the LEDs, so that will cover SPS only easily, plus room to upgrade to a much deeper tank.
see my response above
32s just came in by the way!
Anthony Scholfield
Valuable Member
I ordered one as soon as i got the email notification.
I think i will wait for the 24" cause it is for an acro grow out in the 25 lagoon.
I would definitely recommend the 48 or 50, that extra length makes a big difference, ie the 32 would need 18" of height to cover a 48" tank at least, the 48 will do the job at 8-12".
If I have a 30 inch tank woul d this work If I mount it some way? Dont want any light to bleed over the side.Its a 36 gallon bowfront. The legs could possibly rust too couldnt they? Do you give discount to members of reef2reef. I am looking at about 6 lights and this would make my decision easier. Are these madein america or China? Where do they go for service? Are leds replaceable and can you change the the percent from 90 to 120? Isnt it a 90 percent? Thanks
Hi,
The 32 will not work on a 30" tank. The Photon 50 is not 50" long, in fact it's about 47" in length, so that's why it will fit a 48" tank.
I recommend the Photon 24-V2+ for your tank. We won't have new ones in stock for about 4 weeks, but we just got a few lightly used ones in that were exchanged for larger sized lights. They are 15% off retail, first come first served.
They are manufactured overseas like most major LED brands, however all our inventory is in the USA, and more importantly, so is our Customer Service and Warranty.
No, LEDs are not user replaceable. While it's rare for LEDs to go out, we would handle that by sending a new LED board, and repairing the original board in our shop.
I don't follow what you mean by percent. Perhaps the optics? We use 100 degree optics for an optimal blend of light mixing, spread, and depth penetration.
reefbuilt1
New Member
I know this is an older thread,
But im looking for either 2x 24's and a 16 or 3x 24's, for my 72x24x24. Does that sound acceptable?
Also is there a better time line of availability now that it has been a couple months since this post?
But im looking for either 2x 24's and a 16 or 3x 24's, for my 72x24x24. Does that sound acceptable?
Also is there a better time line of availability now that it has been a couple months since this post?
