44 Brute, measurements for gallon markers??

[smartwater101]

I cant seem to find the post, but someone had measured the Brutte 44 and posted an image of where to mark the gallons. I believe it was every 5 gallons.

Does anyone know the measurements or know where that post is lurking? Thanks!

 

[ndrwater]

Try the search feature here using a few key words. You should be able to find the post that way

 

[Peace River]

Not sure which thread you had in mind, but there seems to be several. Here are the links to a few:

Silly question regarding brute cans

Hey all, continuing to move forward with my 90RR build and remote filter room in basement. I'll be using 2 32 gallon Brute cans for RODI water and saltwater mixing. I have a couple questions: First who has suggestions on how to or what to use to measure accurately volume in the can so I can...

www.reef2reef.com

44 Brute, measurements for gallon markers??

I cant seem to find the post, but someone had measured the Brutte 44 and posted an image of where to mark the gallons. I believe it was every 5 gallons. Does anyone know the measurements or know where that post is lurking? Thanks!

www.reef2reef.com

 

[smartwater101]

Not sure which thread you had in mind, but there seems to be several. Here are the links to a few:

Silly question regarding brute cans

Hey all, continuing to move forward with my 90RR build and remote filter room in basement. I'll be using 2 32 gallon Brute cans for RODI water and saltwater mixing. I have a couple questions: First who has suggestions on how to or what to use to measure accurately volume in the can so I can...

www.reef2reef.com

44 Brute, measurements for gallon markers??

I cant seem to find the post, but someone had measured the Brutte 44 and posted an image of where to mark the gallons. I believe it was every 5 gallons. Does anyone know the measurements or know where that post is lurking? Thanks!

www.reef2reef.com

Neither of these address my question and one is a link to this very thread.

Ive been searching but haven't found it. Must be on another reef keeping forum. Ill just dump 5 gallons in at antime, and mark along the way. But i was really hoping to get proper measurements.

 

[Eldritch_blast]

Neither of these address my question and one is a link to this very thread.

Ive been searching but haven't found it. Must be on another reef keeping forum. Ill just dump 5 gallons in at antime, and mark along the way. But i was really hoping to get proper measurements.

Hey I am looking for these did you happen to take notes lol

 

[Saltyreef]

Yall could have filled up some gallon containers and marked the can yourselves by now lol!

 

[Eldritch_blast]

Yall could have filled up some gallon containers and marked the can yourselves by now lol!

I’m just looking to save a step mate. If someone would just post their measurements we could all skip that tedious step, what is it like some sort of right of passage?

totally clowning around here but also like a little serious.

 

[Eldritch_blast]

Yall could have filled up some gallon containers and marked the can yourselves by now lol!

Ok so here’s what I came up with.

Brute 44G

First 5G- About 4 7/8”

Then the spread for every 5 G up to the 30 G mark is 3 1/2”, or 7” for 10 G.

There now this should be a searchable topic for us slackers out there.

 

[Viva'sReef]

Ok so here’s what I came up with.

Brute 44G

First 5G- About 4 7/8”

Then the spread for every 5 G up to the 30 G mark is 3 1/2”, or 7” for 10 G.

There now this should be a searchable topic for us slackers out there.

Can you please measure it from the inside? Just to be sure? lol

 

[Eldritch_blast]

Can you please measure it from the inside? Just to be sure? lol

I have a super dirty tape it’s not touching the inside. I shined a light through to the water line after pouring in measured amounts. I’d be surprised if someone found these to be off much.