72x30x18 DIY build thread

To this......
1000003477.jpg
1000003476.jpg
1000003479.jpg
1000003478.jpg
1000003475.jpg
1000003480.jpg
You've come a long way in a year Nate. CONGRATS.
 
Update on the UV sterilizer....

Jebao cw-55, got it opened up, not sure if the bulb burnt out, or the connection got wet and shorted.... there is some rust on the bulb pins. Anyway to verify the plug end is getting power at pins still?
 
use your tongue...:p
electrical tester...:)
the socket is 4 pin, i guess i need to just test continuity between 2 of the pins? I guess that was my question. If anyone knew before I just went and did it.
 
I think it's cooked. Nothing showing up when I connect any pin to pin.
 

Attachments

  • PXL_20231124_164301434.jpg
    PXL_20231124_164301434.jpg
    81.6 KB · Views: 44
  • PXL_20231124_164305690.jpg
    PXL_20231124_164305690.jpg
    164.4 KB · Views: 38
1700845540036.png


Numbers looking good though, Think I will dose a little Alk and some reef roids :) Otherwise we are looking as the euros say we are spot on banging
 
Ain't no one slamming ? Weird
 

Attachments

  • PXL_20231124_231405289.jpg
    PXL_20231124_231405289.jpg
    248.2 KB · Views: 40
  • PXL_20231124_231419109.jpg
    PXL_20231124_231419109.jpg
    258.5 KB · Views: 36
  • PXL_20231124_231430973.jpg
    PXL_20231124_231430973.jpg
    202 KB · Views: 42
  • PXL_20231124_231437484.jpg
    PXL_20231124_231437484.jpg
    197.1 KB · Views: 40
  • PXL_20231124_231447205.jpg
    PXL_20231124_231447205.jpg
    239.1 KB · Views: 41
  • PXL_20231124_231501040.jpg
    PXL_20231124_231501040.jpg
    235.7 KB · Views: 39
  • PXL_20231124_231521748.jpg
    PXL_20231124_231521748.jpg
    251.3 KB · Views: 40
  • PXL_20231124_231530855.jpg
    PXL_20231124_231530855.jpg
    290.7 KB · Views: 36
  • PXL_20231124_231558088.jpg
    PXL_20231124_231558088.jpg
    168.3 KB · Views: 38
  • PXL_20231124_231606431.jpg
    PXL_20231124_231606431.jpg
    212 KB · Views: 37
  • PXL_20231124_231612389.jpg
    PXL_20231124_231612389.jpg
    187.5 KB · Views: 37
  • PXL_20231124_231621099.jpg
    PXL_20231124_231621099.jpg
    169.8 KB · Views: 33
  • PXL_20231124_231641485.jpg
    PXL_20231124_231641485.jpg
    197.4 KB · Views: 34
  • PXL_20231124_231712057.jpg
    PXL_20231124_231712057.jpg
    177.4 KB · Views: 35
  • PXL_20231124_231724294.jpg
    PXL_20231124_231724294.jpg
    192.7 KB · Views: 33
  • PXL_20231124_231755522.jpg
    PXL_20231124_231755522.jpg
    192.3 KB · Views: 37
  • PXL_20231124_231808719.jpg
    PXL_20231124_231808719.jpg
    233.2 KB · Views: 39
  • PXL_20231124_231844460.jpg
    PXL_20231124_231844460.jpg
    182.4 KB · Views: 34
  • PXL_20231124_231902692.jpg
    PXL_20231124_231902692.jpg
    336.9 KB · Views: 41
  • PXL_20231124_231928117.jpg
    PXL_20231124_231928117.jpg
    300.6 KB · Views: 41
  • PXL_20231124_231942554.jpg
    PXL_20231124_231942554.jpg
    216.3 KB · Views: 35
  • PXL_20231124_232038192.jpg
    PXL_20231124_232038192.jpg
    195.2 KB · Views: 37
  • PXL_20231124_233514987.jpg
    PXL_20231124_233514987.jpg
    150.1 KB · Views: 39
  • PXL_20231124_233547793.jpg
    PXL_20231124_233547793.jpg
    192.4 KB · Views: 43

These would be cool.

Or getting max spec pair air brushed by my dad... Hmmm need to work with him on what coating is aquarium safe
 

These would be cool.

Or getting max spec pair air brushed by my dad... Hmmm need to work with him on what coating is aquarium safe
or what clearcoat is aquarium safe.
 
Hydros/Trident/Reef Factory is confusing.... Idk what pieces I need to monitor PH, ORP (dont really care) , Salinity (dont really care)
 

I think this>?
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top