72x30x18 DIY build thread

ReefBreeders Meridian
Jump to Last
1. Worth it to test par?
Things are going fine. But I have never measured par . Just a what if digging at me..what if I'm low and should be higher.

Sub point add additional lighting t5 or more orphek bars.

2. Testing ph? Same thing . Things are fine. But what if it's low and how can I continue to test and monitor different changes like routing a line outdoors or recirculating the skimmer air through scrubber. ( Which media hasn't turned pink at all... It's still white after almost a year.
 
Top Shelf Aquatics
Top Shelf Aquatics
My 2c.

1) See if there is a local club that has a par meter that is available to its members. I think BRS or SWA may have a rental option. Not worth buying one since good ones are 400+.

2) Ph meter is under 100. If you want one that can monitor and/or control its more. I got the pinpoint monitor to use with the scrubber. The scrubber was a bust ( for now). But I like being able to see what the ph is at a glance. Esp now with some nice sps in the tank. Just need to calibrate often to ensure it doesn't start to move on you.

I'm a numbers chaser. It's not something I'm proud of. But my OCD tendencies demand it. I was able to borrow a par meter and I made some tweaks to my lights based on the results but never ended up with moar lights. A nice little pinpoint meter for ph is a sound investment if only for piece of mind. Par meter not so much.
 
gotta remember...
1701776610747.png
 
Stang67 said:
My 2c.

1) See if there is a local club that has a par meter that is available to its members. I think BRS or SWA may have a rental option. Not worth buying one since good ones are 400+.

2) Ph meter is under 100. If you want one that can monitor and/or control its more. I got the pinpoint monitor to use with the scrubber. The scrubber was a bust ( for now). But I like being able to see what the ph is at a glance. Esp now with some nice sps in the tank. Just need to calibrate often to ensure it doesn't start to move on you.

I'm a numbers chaser. It's not something I'm proud of. But my OCD tendencies demand it. I was able to borrow a par meter and I made some tweaks to my lights based on the results but never ended up with moar lights. A nice little pinpoint meter for ph is a sound investment if only for piece of mind. Par meter not so much.
Click to expand...
Right I think it's my OCD. But what the heck do I know . Haha


I dunno any local clubs. Was just thinking rent from brs $100.

I like graphs
 
www.dinkinsaquaticgardens.com
Nutramar Foods
Nutramar Foods
Deltec
mine for my hybrids when i used them were pressure loaded. you had to push in on the top part and it removed the pressure and allowed the wire to go through. make sure if you release the pressure you are holding the light lol
 
Nate Chalk said:
#Cronies
Anyone ever seen these mounting wires?

I am having trouble getting more slack out of the cable. They are from @Orphek
PXL_20231205_221608764.jpg
PXL_20231128_171612009.jpg
Click to expand...
What's the question? How do you allow more slack?
Usually there is a set screw that you loosen to allow some slack. Some are on the sides, others you loosen the top or bottom of the barrel.
 
Deltec
F i s h y said:
mine for my hybrids when i used them were pressure loaded. you had to push in on the top part and it removed the pressure and allowed the wire to go through. make sure if you release the pressure you are holding the light lol
Click to expand...
Or this.
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Reef Legends, for all your aquarium needs.
TCK Corals
World Wide Corals
Tidal Gardens
Top Shelf Aquatics
Dinkins Aquatic Gardens
Deltec
Nutramar Foods
Chewy.com
New Posts
Back
Top