9004 DC & Safety Connector
- Thread starter Clownfishy
- Start date
- Tagged users None
Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)
It is, I generally wouldn't worry about backing up a skimmer, typically you just want to keep some flow going, it would probably help, but realistically backups can only do so much and the limited power is likely best directed to keeping flow going.
OP
OP
Clownfishy
Well-Known Member
That is awesome news. I agree and have been using the Safety connectors for years with my pumps and they are just brilliant. I am considering downsizing to a nano and will have a spare battery even after connecting the Tunze wavemaker to the other battery so am considering using it for the skimmer. Tunze is years ahead of its competition with these safety connectors. I cannot tell you how many times this has saved my aquarium when the power cuts out. 
I do have a problem using them with my Apex controller so not sure if you have any advice on this issue -
www.reef2reef.com
I do have a problem using them with my Apex controller so not sure if you have any advice on this issue -
Tunze Safety Connector and Apex Power Outage not working
I have an Apex 2016 and have connected 2 old Tunze 6095 to the Apex using the Apex Tunze Y connector. I have also connected the 2 pumps to a Tunze Safety connectors so when the power goes out, the pumps will still work. However, when they are connected to the Apex using the Y connector, when...
www.reef2reef.com
Unfortunately, with a zero volt signal from the controller, the pump is basically instructed to be off, I don't really know of a way around this.
OP
OP
Clownfishy
Well-Known Member
Many thanks for your reply. I will take them off the Apex as that is a bit of a problem on the Apex side!
