A1 Prime HD for Red Sea reefer 170

[4FordFamily]

OK so I bet the bullet and bought an AI Pre HD and mounting kit light system for my RS170 I won here.

I also bought a jebao DCT 4000 return pump.

What else do I need to make this tank great? I'm not trying to get too crazy, I don't keep really difficult coral and I'm really cheap. I feel like I bought an expensive light -- with enough features that I'll have absolutely no idea how to use.

I see all of these settings listed and apps needed -- dang...

I will be using it as a live rock and coral QT for 76 days before I add them to my display. It'll house clams as well.

With a tank that small, so I need a slimmer? I really dislike HOB skimmers. Advice?

I won't be setting it up until I move in to my new house in September.

 

[burtbollinger]

I set one up in December (https://www.nano-reef.com/forums/topic/378847-burtbollingers-red-sea-reefer-170/)

from my experience only:

40+ gallons...probably get a skimmer. I'd go with the BM Curve 5 skimmer, goes in sump. Lots of folks recommend it for the 170...I'm very happy with mine.

IF no skimmer, I'd jam the main area of the sump with chaeto and light it with a Kessil h380 or something. (or your cheap alternative)

I'd put a Marinepure 8 x 8 x 1 plate in the small overflow area of the sump.

Other than that...I'd look into maybe an MP10 or a cheaper alternative for extra circulation.

Buy a few extra RS mesh filter socks...get a decent heater (and a reefkeeper lite or inkbird to control it), maybe look into ditching the RSM's very basic ATO. I don't like the stock one at all.

Probably get a small battery powered LED light for inside the stand so you can see.

 

[4FordFamily]

I set one up in December (https://www.nano-reef.com/forums/topic/378847-burtbollingers-red-sea-reefer-170/)

from my experience only:

40+ gallons...probably get a skimmer. I'd go with the BM Curve 5 skimmer, goes in sump. Lots of folks recommend it for the 170...I'm very happy with mine.

IF no skimmer, I'd jam the main area of the sump with chaeto and light it with a Kessil h380 or something. (or your cheap alternative)

I'd put a Marinepure 8 x 8 x 1 plate in the small overflow area of the sump.

Other than that...I'd look into maybe an MP10 or a cheaper alternative for extra circulation.

Buy a few extra RS mesh filter socks...get a decent heater (and a reefkeeper lite or inkbird to control it), maybe look into ditching the RSM's very basic ATO. I don't like the stock one at all.

Probably get a small battery powered LED light for inside the stand so you can see.

Thanks for the advice!

Also, perhaps a stupid question. My 170 is still on the pallet they shipped it on. Did yours come very collapsed and appear to be about the size of just the tank itself? Or did I get onkh the tank. It went right to storage and I remember thinking "I am impressed, how did all of this fit on this tiny space?"

 

[burtbollinger]

Thanks for the advice!

Also, perhaps a stupid question. My 170 is still on the pallet they shipped it on. Did yours come very collapsed and appear to be about the size of just the tank itself? Or did I get onkh the tank. It went right to storage and I remember thinking "I am impressed, how did all of this fit on this tiny space?"

yes, I think the sump may be inside the tank. Its a bit hazy.

Might be worth checking tho, make sure you have a sump included.

 

[4FordFamily]

yes, I think the sump may be inside the tank. Its a bit hazy.

Might be worth checking tho, make sure you have a sump included.

It's in storage in its original wrapping, but I feel like you're right! Thank you.

 

[dragon99]

I have 2 Reefers now, a 350 and a Max Nano (170 without the sump).
The ATO's they include work great, but are very undersized. Unless you just enjoy filling it every 2-3 days, a new ATO container is a great upgrade.
The Prime is great light. Setup thru the IOS or Andriod APP is pretty easy, but I used my laptop instead.

 

[jsker]

Looks like you are off to a good start with advice. I set up my AI light with IOS and make my adjustments on the PC.

 

[4FordFamily]

For someone that is technology illiterate -- I just want basic light! Features are cool but not why I bought it haha!

 

[4FordFamily]

Alright so that was not hard at all to set up.

Now I need to figure out what to adjust it to -- I have it on a temp tank a friend was moving and gave me his coral -- now to keep it alive for 3 more weeks!

 

[4FordFamily]

Finally setting it up. 3/4 done!

@HotRockTarBaby and I worked on it this afternoon a lot!

Thanks @revhtree, build thread incoming!