Advice on Donovan's Nitrate Destroyer build

[Aleph]

Hi guys I have very high nitrates in my tank (>100 ppm) and I tried everything to lower them with no success. I stumbled upon Donovan's thread and I've been struck by the simple yet incredibly brilliant idea behind the Nitrate Destroyer, it was so sad to read he's no longer with us, he seemed a very nice and brilliant person!

So, I'm thinking about building a scaled down version of the DND on my 20g tank, I wanted to ask you some feedback about the build, specifically I have two doubts:

Since I have a small sump I wanted to use smaller tubes to reduce the total footprint. I read that the actual diameter of the tubes is less relevant than the height, would it be fine to use a smaller tube, like a 2 inch one?

Could you point out a good media combination to put in the DND with the correct order? I have Pond Matrix and Siporax in the sump so I could put them in if they are suitable, what else? I've seen many possible solution, I wouldn't want to mess up the whole thing with the wrong media!

Thank you so much for you help!

 

[MnFish1]

Hi guys I have very high nitrates in my tank (>100 ppm) and I tried everything to lower them with no success. I stumbled upon Donovan's thread and I've been struck by the simple yet incredibly brilliant idea behind the Nitrate Destroyer, it was so sad to read he's no longer with us, he seemed a very nice and brilliant person!

So, I'm thinking about building a scaled down version of the DND on my 20g tank, I wanted to ask you some feedback about the build, specifically I have two doubts:

Since I have a small sump I wanted to use smaller tubes to reduce the total footprint. I read that the actual diameter of the tubes is less relevant than the height, would it be fine to use a smaller tube, like a 2 inch one?

Could you point out a good media combination to put in the DND with the correct order? I have Pond Matrix and Siporax in the sump so I could put them in if they are suitable, what else? I've seen many possible solution, I wouldn't want to mess up the whole thing with the wrong media!

Thank you so much for you help!

He is a member here - I might send him a PM. Probably not that many people have an answer to that specific question.

Donovan Joannes​

 

[Aleph]

@MnFish1 sorry my statement was misunderstandable, unfortunately Donovan has passed away a few years ago.

 

[oreo54]

@MnFish1 sorry my statement was misunderstandable, unfortunately Donovan has passed away a few years ago.

For simplicity you could try an anoxic filter

New Filtration System for Reef Tanks!!!

I would like to introduce a new filtration system to the hobby. It's very inexpensive, easy to make and is very effective at reducing ammonia from the aquarium. Let us start this thread with typical information and methods in our hobby, a conventional biological filter: Fish continuously...

www.reef2reef.com

I suggest any high CEC substrate though it isn't a necessity apparently.
Saf-t-sorb, Turface, or certain non - crumbling when wet cat litter
If you look at the original design that and Fe injection is all that is needed.

Just a thought

 

[Modest]

I have just one media in there: Maxspect bio spheres. My nitrate stays at 3 ppm without adding carbon or extra bacs.

 

[Aleph]

@oreo5457 thanks for the suggestion, I will look into that!

@Modest thanks for the info, I will probably go with a pond matrix/siporax/1 inch bio balls combo

 

[Modest]

Good luck with your project. It’s a fantastic tool.

 

[HomebroodExotics]

For simplicity you could try an anoxic filter

New Filtration System for Reef Tanks!!!

I would like to introduce a new filtration system to the hobby. It's very inexpensive, easy to make and is very effective at reducing ammonia from the aquarium. Let us start this thread with typical information and methods in our hobby, a conventional biological filter: Fish continuously...

www.reef2reef.com

I suggest any high CEC substrate though it isn't a necessity apparently.
Saf-t-sorb, Turface, or certain non - crumbling when wet cat litter
If you look at the original design that and Fe injection is all that is needed.

Just a thought

I second the anoxic filter or bcb basket. I’m playing with them now and so far it’s impressive.

 

[Aleph]

@Modest thanks!

@HomebroodExotics thanks, I will look into that!