AI Prime 16 light profiles for BYA

[BigBearReef]

I just purchased a BTA and am wondering if anyone has light profile settings that they can share with me. I have a AI Prime 16 light on my 40 gal tank.

 

[Spare time]

Max out all the blue/violet channels. The others are up to you but don't have the white on for more than 6 hours (similar for red or green). Look up a graph of chlorophyl A and C to get an idea of what the zooxanthellae can use.

 

[Waynerock]

Here is what I have been using for a while since the old prime HD’s and now on the 16’s

 

[smirkis]

id suggest you go here https://www.aquaillumination.com/lightsciences/signature-series and load up one of these presets on your lights. BTA can survive under any of the signature series settings tbh. just pick one that fits your viewing pleasure and make sure you use acclimation mode.

 

[Aswswild]

I think it’s funny how they have no settings for there new line of lights kinda bit s

 

[smirkis]

I think it’s funny how they have no settings for there new line of lights kinda bit s

the settings work on old or new lights. the only difference is the older settings don't use the yellowish moonlight that got added. i don't know if anyone even uses the new moonlight feature, but i do *shrug*

 

[Aswswild]

the settings work on old or new lights. the only difference is the older settings don't use the yellowish moonlight that got added. i don't know if anyone even uses the new moonlight feature, but i do *shrug*

No I understand you but on there web site u would think they would highlight 1 tank with the 64 an show u a graph for it. They only use there old stuff

 

[DesertReefT4r]

the settings work on old or new lights. the only difference is the older settings don't use the yellowish moonlight that got added. i don't know if anyone even uses the new moonlight feature, but i do *shrug*

I did for a few days on my Hydra 32 but I like my reef to sleep at night and the moon light was keeping my fish active at night. Not sure how the luner setting works either. Plus I dont want the white/yellowish moon leds on durning the day which they are unless you do a custom set point for just the moons, which is no big deal to do.
To the OP. Any of the popular setting will be fine for a BTA but keep in mind that the new AI lights have a slightly different led layout than the previous models so for example the AB+ setting will be different. It was way blue on my 32s. I have mostly sps and am considering a BTA, but here are my setting.
Cool White 40%
Blue 101%
Royal Blue 101%
Violet 110%
UV 110%
Green 5%
Deep Red 5%
Moon 0%.
You can always use the presets too. 14k has a very Radium 20k look to it and 20k is very blue if you want that look. Any of the presets from 10-20k will be fine for the BTA.

 

[Aswswild]

I did for a few days on my Hydra 32 but I like my reef to sleep at night and the moon light was keeping my fish active at night. Not sure how the luner setting works either. Plus I dont want the white/yellowish moon leds on durning the day which they are unless you do a custom set point for just the moons, which is no big deal to do.
To the OP. Any of the popular setting will be fine for a BTA but keep in mind that the new AI lights have a slightly different led layout than the previous models so for example the AB+ setting will be different. It was way blue on my 32s. I have mostly sps and am considering a BTA, but here are my setting.
Cool White 40%
Blue 101%
Royal Blue 101%
Violet 110%
UV 110%
Green 5%
Deep Red 5%
Moon 0%.
You can always use the presets too. 14k has a very Radium 20k look to it and 20k is very blue if you want that look. Any of the presets from 10-20k will be fine for the BTA.

The luner mode winds the lights down more than the ramp down mode. My BTA is fine.

 

[Aswswild]

Pic

 

[BigBearReef]

id suggest you go here https://www.aquaillumination.com/lightsciences/signature-series and load up one of these presets on your lights. BTA can survive under any of the signature series settings tbh. just pick one that fits your viewing pleasure and make sure you use acclimation mode.

Thanks

 

[Ryan173rd]

how do you load them on a iPhone