Ai prime help
- Thread starter JCM0521
- Start date
- Tagged users None
OP
OP
JCM0521
Community Member
Yes i have a par meter it's luke 160 to 170 at the top
Attachments
BAMatter
Valuable Member
Need more white to get the PAR higher with only 4 Primes. I’m running 2 Hydra64’s and an Orphek OR120 on my 75. You can try turning the whites up, if it’s too white, ad a blue or a UV 48” bar of some sort.
I'm not a Prime user either.
Looks like half of the channels are basically off. You are probably lowering the lifespan of the LEDs and risking melting the lenses with % that high on the UV.
Raising the cool white would likely help a lot. I would raise those channels a bit for about 6 hours a day for the SPS photosynthesis. After that, if you like viewing the tank with more blue, adjust the schedule for evening viewing.
Looks like half of the channels are basically off. You are probably lowering the lifespan of the LEDs and risking melting the lenses with % that high on the UV.
Raising the cool white would likely help a lot. I would raise those channels a bit for about 6 hours a day for the SPS photosynthesis. After that, if you like viewing the tank with more blue, adjust the schedule for evening viewing.
piranhaman00
5000 Club Member
- Joined
- Jun 24, 2019
- Messages
- 5,023
- Reaction score
- 4,995
You are going to burn out your lenses in no time with those settings
Jesse Sunday
Well-Known Member
Based on this video, I would think that 4 16HDs on a 4' tank would be plenty.
Seems like you have them cranked into overdrive too.
Strange.
How high above the tank are they and how spread out from each other and the edge of the tank?
Dburr1014
10K Club member
I was just going to say UV is going to burn your lenses. There was just a thread this morning they just had to replace their lenses cuz they got burned out. It's a bad design lower your UVs
OP
OP
JCM0521
Community Member
Do you think 2 more primes would help
OP
OP
JCM0521
Community Member
Alright thanks
OP
OP
JCM0521
Community Member
Using 12 in goose necks
BAMatter
Valuable Member
Yes. For sure. That would be the equivalent (ish) to 3 of the Hydra 32’s. 6 Primes should get you there, and an LED bar will pull slack. Like others said, your settings are going to fry lenses so keep some on hand.
OP
OP
JCM0521
Community Member
Idech
2500 Club Member
I had 4 x AI Prime 16 HD on my 75 gallons, 48 inches tank and I had 300 par at the top. Light intensity was about 85%. 21 inches deep aquarium and lights about 9 inches above the water.
Roatan Reef
Valuable Member
@JCM0521
Have you downloaded any schedules from AI??
I use the Saxby on my 40GB and my 13.5 Fluval Evo.
You should be just fine with what you have, but as others have said...you have UVs and Blues cranked 1000% max, with no white.
Go to the AI website and download some schedules. This will help you immensely. They have plenty of options from reefers all over the world
https://www.aquaillumination.com/lightsciences/signature-series
Also just like @nereefpat said.. you need more white...SPS tanks can not live as a windex tank like LPS do, you need more natural bright sun light running through the day, not blues and UVs at 1000000%
For instance...
Have you downloaded any schedules from AI??
I use the Saxby on my 40GB and my 13.5 Fluval Evo.
You should be just fine with what you have, but as others have said...you have UVs and Blues cranked 1000% max, with no white.
Go to the AI website and download some schedules. This will help you immensely. They have plenty of options from reefers all over the world
https://www.aquaillumination.com/lightsciences/signature-series
Also just like @nereefpat said.. you need more white...SPS tanks can not live as a windex tank like LPS do, you need more natural bright sun light running through the day, not blues and UVs at 1000000%
For instance...
Last edited:
