AI Prime Settings for Evo13.5?

[ajm123]

Hi guys,
I’m currently using David Saxby setting from the AI Signature series at 50% acclimation mode. I really like the way it makes my coral look, however I hate the way the fish look. They’re so washed out by blues you almost can’t see them. I find it strange that you can’t tweak/edit the pre made settings, or I would add whites to Saxbys. Anyone have good all around mixed reef settings??

thanks in advance!

 

[TokenReefer]

I know what you mean. I dropped the whites by 10 on each point of the saxby sched, may even do a tad more...eventually...

 

[ajm123]

I know what you mean. I dropped the whites by 10 on each point of the saxby sched, may even do a tad more...eventually...

How were you able to edit the preset?

 

[TokenReefer]

you tap on the little yellow dot under the bottom line; those are your set points. You can adjust each spectrum within the set point. A little tedious...

 

[Dave1993]

i skipped saxbys don't like how it was on for 14 hours a day

 

[TokenReefer]

Mine comes on at 9:50 and goes off at 11

 

[ajm123]

you tap on the little yellow dot under the bottom line; those are your set points. You can adjust each spectrum within the set point. A little tedious...

you tap on the little yellow dot under the bottom line; those are your set points. You can adjust each spectrum within the set point. A little tedious...

Do you mind sharing your settings?

 

[ajm123]

i skipped saxbys don't like how it was on for 14 hours a day

Do you mind sharing what you use?

 

[Dave1993]

Do you mind sharing what you use?

i use

Dmitry Tumanov settings​

 

[ajm123]

i use

Dmitry Tumanov settings​

No edits?

 

[Dave1993]

No edits?

tuned down abit

 

[ajm123]

tuned down abit

“Acclimated” or manually turned down intensity ?

 

[Dave1993]

“Acclimated” or manually turned down intensity ?

you get ur 2 fingers and slide up it will turn it down if it slides to the time you have ur fingers the wrong way

 

[TokenReefer]

Do you mind sharing your settings?

It's literally default saxby with whites down by 10 on all set points. Tap the yellow dot, hit edit below, make change, hit check mark, repeat. The white values that were already below 10 I just lowered by like 5 or something...

I did however jack overall the intensity up to 80% at the highest peak (I run one puck atm). I also ran an acclimation for at least a month using my own AB+ schedule but eventually switched to saxby (modified)

Lighting can be very relative to the individual tank however; this is just my anecdotal info

 

[ajm123]

It's literally default saxby with whites down by 10 on all set points. Tap the yellow dot, hit edit below, make change, hit check mark, repeat. The white values that were already below 10 I just lowered by like 5 or something...

I did however jack overall the intensity up to 80% at the highest peak (I run one puck atm). I also ran an acclimation for at least a month using my own AB+ schedule but eventually switched to saxby (modified)

Lighting can be very relative to the individual tank however; this is just my anecdotal info

How do you modify the time that saxby is on without ‘pulling’ the light schedule into some 24hr long crescendo? The interface in this app is clunky to say the least.

 

[olonmv]

How do you modify the time that saxby is on without ‘pulling’ the light schedule into some 24hr long crescendo? The interface in this app is clunky to say the least.

Go to where it graphs out your light shecudle, with two fingers spread apart and that extends time, squeeze together and it reduces time. Kinda like zooming in and out of a pic on your phone. Keeping fingers spaced while moving left or right, moves the schedule as a whole.

 

[Tathamet]

I’d say it’s actually one of the better apps for reef lighting lol. Not very hard to use at all once you figure it out. The only problem is there aren’t really explanations on how to use the features it has and if you haven’t used one before it can be a bit jarring at first. It’s actually really nice once you figure it all out.

 

[Dave1993]

does any1 know how to decrease the hours of a setting cause the saxby setting is like 14 hours i would like it 12 hours

 

[Tathamet]

does any1 know how to decrease the hours of a setting cause the saxby setting is like 14 hours i would like it 12 hours

Do the finger pinch thing @olonmv mentioned

 

[TokenReefer]

does any1 know how to decrease the hours of a setting cause the saxby setting is like 14 hours i would like it 12 hours

Go to where it graphs out your light shecudle, with two fingers spread apart and that extends time, squeeze together and it reduces time