Alarm nonsense ?

Hallowhead · Apr 14, 2022

Howdy,

Can anyone help me understand what's going on? I'm getting hundreds of notifications like below but nothing's wrong with the tank.

Gtinnel · Apr 14, 2022

Is your email alarm slider set to on or auto?

Hallowhead · Apr 14, 2022

Gtinnel said:
Is your email alarm slider set to on or auto?

It's set to auto.

Here and there a leak detector claims to be wet but than immediately turns off so I think that's another issue in itself but I have 1300 pages of just alarm off

Gtinnel · Apr 14, 2022

I just realized the alarm off being sent is not every hour which would actually rule out the slider being set to one. My guess is that the leak sensor is being tripped just long enough to set an alarm but then goes back to normal state before sending the alarm, which can cause the alarm to be shown as off over and over. I would try unplugging sensors until you find the one that makes it stop.

Gtinnel · Apr 14, 2022

I’m also pretty sure you can set a minimum time in your alarm code that requires the sensor to stay in an alarm state for a certain amount of time before it sets the alarm status to on.

Hallowhead · Apr 14, 2022

Gtinnel said:
I’m also pretty sure you can set a minimum time in your alarm code that requires the sensor to stay in an alarm state for a certain amount of time before it sets the alarm status to on.

How do you do this !!!

Hallowhead · Apr 14, 2022

Min Time 000:30 Then ON

Hallowhead · Apr 14, 2022

Just need to see how to implement it

Gtinnel · Apr 14, 2022

I am far from an expert on apex but I believe that it doesn’t matter where you add that line to your code. From what I’ve read it applies that code to everything and not just in the order of the code.
If it were me I would still try to figure out what sensor was causing it.

Hallowhead · Apr 14, 2022

Gtinnel said:
I am far from an expert on apex but I believe that it doesn’t matter where you add that line to your code. From what I’ve read it applies that code to everything and not just in the order of the code.
If it were me I would still try to figure out what sensor was causing it.

I have not gotten an alarm In a hot second so maybe it's working