Alkalinity low Calcium high

[lapin]

thank you i'll add baking soda, wasn't said,should i add baking soda in a reactor

This will help on the gettting things back to normal levels
Dose the sump not the reactor.

http://reefkeeping.com/issues/2006-02/rhf/index.php

And this

Don't turn the calcium reactor off, just raise the Ph to like 7.5 and leave the pumps running

 

[Lasse]

question is, how many hours should i run the reactor to prevent not having anaerobic conditions H2S

You must run it 7/24 - Do not stop it

Don't turn the calcium reactor off, just raise the Ph to like 7.5 and leave the pumps running

This is a very wise advise too. When you have your calcium where you want it and have dosed up your alk - turn on the CO2 again

Sincerely Lasse

 

[hyeclass]

You must run it 7/24 - Do not stop it


This is a very wise advise too. When you have your calcium where you want it and have dosed up your alk - turn on the CO2 again

Sincerely Lasse

highly recommended NOT to go below 6.5 another wise media will start melting i have it up not sure the pressure is 20 PSI

 

[hyeclass]

You must run it 7/24 - Do not stop it


This is a very wise advice too. When you have your calcium where you want it and have dosed up your alk - turn on the CO2 again

Sincerely Lasse

i have to keep adjusting the CarbonDoser Electronic CO2 Regulator it's never stable works perfect, my CO2 is 1000 PSI 2yrs been using it hasn't went down, what would you recommend should i put it to 30 psi?

 

[huckilt]

I’m not proficient in cal reactors by any means but I would think if you’re having to ask for so much advice on how to run it properly you should do a bit more due diligence and research how to set it up and how to dial it in properly. You can ask on all the forums online and get back all kinds of answers but one can only form so good of an opinion with the info provided. YouTube has videos from many different sources on how to do just that I’m sure the company that makes your particular cal reactor has info online on how to use it properly. And you knowing what’s going on and how to remedy all situations would benefit you more in the long run.

 

[hyeclass]

I’m not proficient in cal reactors by any means but I would think if you’re having to ask for so much advice on how to run it properly you should do a bit more due diligence and research how to set it up and how to dial it in properly. You can ask on all the forums online and get back all kinds of answers but one can only form so good of an opinion with the info provided. YouTube has videos from many different sources on how to do just that I’m sure the company that makes your particular cal reactor has info online on how to use it properly. And you knowing what’s going on and how to remedy all situations would benefit you more in the long run.

consistency

 

[hyeclass]

2 NaHCO3 Na2CO3 + H2O + CO2

 

[hyeclass]

I’m not proficient in cal reactors by any means but I would think if you’re having to ask for so much advice on how to run it properly you should do a bit more due diligence and research how to set it up and how to dial it in properly. You can ask on all the forums online and get back all kinds of answers but one can only form so good of an opinion with the info provided. YouTube has videos from many different sources on how to do just that I’m sure the company that makes your particular cal reactor has info online on how to use it properly. And you knowing what’s going on and how to remedy all situations would benefit you more in the long run.

What are you parking enforcement i been running the reactor for 2yrs