Almost X1 doser for all in one

[Reefsupreme]

Anyone use one of the Kamoer X1 dozers on a all in one?

with it being a all in one I have set the doser in the cabinet. Will this be ok being that the hose will run up about 4-5 ft or so? Is the pump strong enough?

Thanks any help appreciate it

 

[Ranjib]

Not using kamoer. But this should be ok, since these are peristaltic pump.

 

[Viva'sReef]

I use the K1 to dose AFR. Should be perfectly fine to pump over long distances once the tubing is primed

 

[Kongar]

I do exactly this for all for reef in my nano. Works fine. The only problem I'm having is the end of the tube crusting over and restricting the flow. I think it's getting wet from the ATO hose that's right next to it and that's causing the crustiness/blockage? I'm going to try one or both of, 1) cutting the AFR with an equal amount of RODI, and 2) using an airline tubing Y adapter so that the ATO flushes the end of the line.

 

[SPS2020]

Not addressing your question directly, but wanted to let you know my experience. I have two X1 Pro 2 pumps, but neither configured for dosing, just top off. On more than one occasion when doing a Manual dose, the pump has continued to run. To my knowledge, this has not occurred when they are scheduled, only during a Manual dose. Due to that, I use a Bubble Magus for my AIO dosing.