Alternatives to AI Prime light flex arm ?

[vegas]

There are a lot of negative reviews about the AI Prime flex arm breaking and causing the light to fall into the tank. I was wondering if anyone has found an alternative arm that is compatible with the AI Prime 16HD thread, or any alternative ways to set it up.

 

[CasperOe]

There are a lot of negative reviews about the AI Prime flex arm breaking and causing the light to fall into the tank. I was wondering if anyone has found an alternative arm that is compatible with the AI Prime 16HD thread, or any alternative ways to set it up.

This one..

 

[DDenny]

AI makes a ridged arm that is what I use as I didn’t trust the flex arm either.

Prime Tank Mount

Easily mount your AI Prime on your rimmed or rimless tank with the adjustable Prime Tank Mount. The innovative ball joint makes it simple to tilt and turn your Prime to get the optimal light for your corals. Made of high-quality brushed aluminum it will look great on any setup. Available in...

shop.aquaillumination.com

 

[CasperOe]

AI makes a ridged arm that is what I use as I didn’t trust the flex arm either.

Prime Tank Mount

Easily mount your AI Prime on your rimmed or rimless tank with the adjustable Prime Tank Mount. The innovative ball joint makes it simple to tilt and turn your Prime to get the optimal light for your corals. Made of high-quality brushed aluminum it will look great on any setup. Available in...

shop.aquaillumination.com

Exactly the one posted above - so I agree with you!

This one is great, and can easily be modified with a metal saw if you're tight for space

 

[DDenny]

Exactly the one posted above - so I agree with you!

The link didn’t work for me but I saw your post figured I would post it any.

 

[tmc13]

if you're crafty and don't like any of the retail options out there here is what I did. Just skip to page three and look at posts #47 and #48.

Nano Build - 22 gallon Mr Aqua (closed loop)

I'm currently in the works downsizing from my 65 gallon to a 22 gallon Mr Aqua. l will be installing a closed loop for flow using the OM flow diverter, so there will be no pumps visible in the tank. The only visible piece of equipment will be a 400 gph fiji cube low profile overflow that will be...

www.reef2reef.com

 

[vegas]

if you're crafty and don't like any of the retail options out there here is what I did. Just skip to page three and look at posts #47 and #48.

Nano Build - 22 gallon Mr Aqua (closed loop)

I'm currently in the works downsizing from my 65 gallon to a 22 gallon Mr Aqua. l will be installing a closed loop for flow using the OM flow diverter, so there will be no pumps visible in the tank. The only visible piece of equipment will be a 400 gph fiji cube low profile overflow that will be...

www.reef2reef.com

This looks great! Can you share your process of making the mount?

 

[tmc13]

I bought a 3-light track light, gutted it and installed the primes using their own stock metal brackets. After that I bought the floating shelf that it's mounted to. There is a coat closet on the other side of the wall. I drilled a small hole through to the closet side and ran the wires through, so all the power supplies are in the closet.

 

[X-37B]

I never had a problem with the bendable arms. I ran 7 with no issues on several tanks for a couple years..
I hated the metal one. If you looked at them they would move, lol.
Metal vs bendable.