Anemone and Wave maker

[John A!10]

I have a jebao wave maker as seen in the link below, and I want to get a BT anemone. I know some brands sell guards, but jebao doesn’t. Do you guys know of a way to make a gaurd?
Tank is a 29g.
I will try to post pictures later.
Jebao SLW-10 Compact Wavemaker 1056gph, Black

 

[fishguy242]

@Eagle_Steve

 

[Eagle_Steve]

@Eagle_Steve

Never made one for that style ph, but I have some ideas.

Coarse black pond filter mesh. Cut it to go over the backside and it should be good. As long as the pump spins blowing out the front, there should be no issues.

You could also use some cross stitch mesh and small zip ties to make a cage for the back. As long as it is at least 7 squares to an inch, they do not get sucked in. The front could even be covered with it and it wouldn’t reduce flow too much. Although it would require more frequent cleaning.

 

[John A!10]

Never made one for that style ph, but I have some ideas.

Coarse black pond filter mesh. Cut it to go over the backside and it should be good. As long as the pump spins blowing out the front, there should be no issues.

You could also use some cross stitch mesh and small zip ties to make a cage for the back. As long as it is at least 7 squares to an inch, they do not get sucked in. The front could even be covered with it and it wouldn’t reduce flow too much. Although it would require more frequent cleaning.

Good idea! I’ll try to find some stretchy style mesh or sponge.