Any one need any custom prints

[Porkenchop]

If you need something made let me know . Power supply mounts , wave pump control mounts, mushroom boxes mp40 mp10 nem guards. Or anything you want I can do my best to make it happen.

 

[Zaireguy]

If you need something made let me know . Power supply mounts , wave pump control mounts, mushroom boxes mp40 mp10 nem guards. Or anything you want I can do my best to make it happen.

Any chance you can make the rms legs for echotech lights?

 

[Porkenchop]

Any chance you can make the rms legs for

I probably could if I could find the measurements on them.

 

[Porkenchop]

Any chance you can make the rms legs for echotech lights?

But to be honest with you with how much them lights are I wouldn't wanna take a chance on the plastic failing and ruin a expensive light. I know the filament I use is strong but there is always a chance it could fail. The rms arms look to be made out if metal which is probably the better idea.

 

[jose hernandez]

looking for mp40 guards but lookin for one similiar to the neat aquactics brand need 4

 

[Porkenchop]

looking for mp40 guards but lookin for one similiar to the neat aquactics brand need 4

this is the one i have it slips over the main wetside. it looks like aquactics one you replace the guard on the wetside

 

[jose hernandez]

Thnks but I prefer the neat aquatic one

 

[Risk1994]

So I want to hang my Theiling compact rollermat in my sump using the included hanger....

problem is the lip on the sump is 2" and the hanger is only like 1/2" deep.

I drew a side view to show what I need (in red).
Basically just a hanger. Id love to use one of those over the door hangers but needs to be 2" deep.
also that bottom portion that goes against the body of the sump would be helpful to keep the roller
level on the vertical.

The hangar on the rollermat is 4" side to side so the red part can be 4", or maybe 2 1" ones.

I could bend some metal or cut some wood but not good for obvious reasons.

 

[Porkenchop]

So I want to hang my Theiling compact rollermat in my sump using the included hanger....

problem is the lip on the sump is 2" and the hanger is only like 1/2" deep.

I drew a side view to show what I need (in red).
Basically just a hanger. Id love to use one of those over the door hangers but needs to be 2" deep.
also that bottom portion that goes against the body of the sump would be helpful to keep the roller
level on the vertical.

The hangar on the rollermat is 4" side to side so the red part can be 4", or maybe 2 1" ones.

I could bend some metal or cut some wood but not good for obvious reasons.

i sent you a message i can do that for you message me back or get ahold of me on my facebook page Porkchops reef. thanks

 

[robinluvsbishies]

If you need something made let me know . Power supply mounts , wave pump control mounts, mushroom boxes mp40 mp10 nem guards. Or anything you want I can do my best to make it happen.

How about nem guards for jebao ow 40 wave maker

 

[robinluvsbishies]

How about nem guards for jebao ow 40 wave maker

 

[Porkenchop]

How about nem guards for jebao ow 40 wave maker

I dont have one to go off of so that I cant to when it comes to that I need the wave pump to test fit and make sure it fits .