Anything Else Needed? (3D Print)

[Dierks]

Hello- I need some sort of cover for my Kessil 360W for the light spilling. Dome /round shape similar to a lamp.
I posted a thread here and there are pics from a member.

Let me know if you need any help, the printer will be open after today!

 

[LetItReef]

Let me know if you need any help, the printer will be open after today!

Let me dig up some pics and let you know. Thanks!

 

[Dierks]

Are you offering to build the ideas or offering to help others who have the 3D printers? Because I do not have a 3d printer. But what I need is fairly straightforward I believe. I want a cuvette drying and holding station for red sea, hanna, and salifert. Something like 2 spiked rows of 10 spaced so the cuvettes dont scratch each other. On each end legs that dont allow it to tip over easily.

I am so sorry, I never notice you asked for this as it was tucked in a Quote, if you are still looking for one of these guys let me know as Printer opens up tomorrow. Again sorry for missing this...

 

[Smudge1493]

Has anybody tried to make a nem guard for Aqamai KPS wavemaker?

Did you manage to make a nem guard for the kps?

 

[Dierks]

Hey @Smudge1493 No I couldn't find anything that was already done. But if you give me dimensions of the current cover we could make one, the only other option would be to send it to me and I could then take the measurements myself. Sorry that there in't one made already.

 

[CEReefer]

Hey @Smudge1493 No I couldn't find anything that was already done. But if you give me dimensions of the current cover we could make one, the only other option would be to send it to me and I could then take the measurements myself. Sorry that there in't one made already.

Sorry for the delay, here are some measures, I also attached a picture with reference letters on:

The diameter of the front grill is 1 3/8" (A); the length of the front part of the wavemaker is 1 1/2" (B), biut if you are planning on something that anchors to the existing grill ithe first holes for a grip are at1 9/16" (C); the largest diameter of the wavemaker is 2" (D), the wavemaker has also a kind of fin where the cord comes out (see second picture), and that fin is 5/16" tall, also the total lenght of the wavemaker to the "bottle neck" where it sits (again I don't know where you are planning on making the nem guard anchor) is about 2 1/4"

 

[CEReefer]

@Dierks please let me know if you need any other measures!

 

[Dierks]

@CEReefer, Thank you! I will get to working on this ASAP! I will shoot you a cad drawing before any action is taken.

 

[CEReefer]

@CEReefer, Thank you! I will get to working on this ASAP! I will shoot you a cad drawing before any action is taken.

Sounds perfect!

 

[newguyintown81]

I have a couple of things I would like made. I need a 4"sock holder and a 1/2" random flow generator

 

[Dierks]

I need a 4"sock holder and a 1/2" random flow generator

Seems simple enough, Shoot me a PM and let me know how the 4" Sock holder needs to be designed or measurements that it needs to be. Shoot me a picture of where it is going so we can figure out what type of clips it will need.

 

[vetteguy53081]

I want a cover for my Drop off tank.

 

[Dierks]

@vetteguy53081 hey bud, I assume I might not be able to help with that one as I am limited in size to 8" x 8" x 9". I am assuming we would have to go much larger? What I can do though is print out the corners so if its rimless you can make a screen. Is that what you are thinking?

 

[DesertCitiesReefer]

Looks like I may need something to help with the sand problem here. Did you make a solution for the AFS with a screen top.

I am in need of a solution for my AFS and my new mesh lid. Four months into reefing and I have already had two fish mortalities one jumper and one blended in a powerhead. Attached is my AFS on the tank with the mesh lid. Basically all the food currently dumps right on the rail of the lid directly in front of the AFS. Two ideas I had was a triangle-based ramp I could attach to the lid for the food to land on then slide into the mesh, then the tank. The second idea was having a new mounting bracket made so that the entire AFS sits an inch or so into the tank. Willing to pay for material, labor and shipping for a solution.

 

[Dierks]

@DesertFF I have a guy sending me the base of the AFS so we can come up with a better solution. As soon as I have it (Couple Weeks) I will make something that can work on rimless and for something that is for the Plastic rim.

 

[Forshurley]

Random request... I bought used EB*#@ and didnt come with mount bracket. Would this be possible to make?

 

[Dierks]

Sorry a what? Not sure what R2R did with the Model Number there.

 

[Beau_B]

I think he means an EB832... sticky shift key... apex energy bar.

 

[Dierks]

Oh!! @Forshurley You bet I can make a Mounting bar! Simply shoot me a PM and we can figure out exactly how you would like it!

 

[Fishyjoey]

I’d be interested in a nem guard for a hydor korolia nano 240.