Apex Fusion for Alexa

Neptune
Jump to Last
Joe Carioti said:
As of today, the official Apex Fusion skill for Alexa has been released. To enable voice commands, search for the skill in the store or follow this link:
https://alexa.amazon.com/spa/index.html#skills/dp/B07J1F2V8W/?ref=skill_dsk_skb_sr_0&qid=1538782940

A new voice configuration page has been added to Apex Fusion (look for the microphone icon) that allows you to set up your customized status report and give outlets and inputs Alexa-friendly names.

Check out the FAQs for more detailed setup instructions:
https://forum.neptunesystems.com/showthread.php?24464-Amazon-Alexa-Integration-with-APEX-Fusion-FAQ
Click to expand...


I have set up some simple commands but will there be the option to set up multiple actions in a single command IE turn off all pumps and feed

Thanks
 
Joe Carioti said:
"Clean" isn't a keyword for this skill. The keywords are variations of start, stop, restart, turn on, turn off, switch on, switch off, switch to auto. If you create an alias for your VO or feed mode and call it "cleaning the sand", you can say "Alexa, ask Apex Fusion to start cleaning the sand".

Some good alias examples I've seen so far have been "photo mode", "maintenance mode", and "a water change". These users can say things like "Alexa, ask Apex Fusion to turn on photo mode" or "Alexa, ask Apex Fusion to start a water change" for example.
Click to expand...
how's that sense of humor coming along??

geez dude, get out some!!
 
Brian Bieger said:
how's that sense of humor coming along??

geez dude, get out some!!
Click to expand...

Sorry, I'm here to make sure new users get set up without headache and to answer questions pertaining to how to use the skill itself. Creating an alias/VO to clean your sandbed is absolutely within the realm possibility here, so I assumed you were asking for help.
 
Tidal Gardens
ALCfish said:
I have set up some simple commands but will there be the option to set up multiple actions in a single command IE turn off all pumps and feed

Thanks
Click to expand...

You can already achieve this by leveraging a feed mode or by creating a virtual outlet:

Skimmer
  • If FeedA 000 then OFF
Return Pump
  • If FeedA 000 then OFF
Wavemakers
  • If FeedA 000 then OFF
By adding that programming to those three items, the outlets will shut off when you start Feed Cycle A. Once the feed cycle finishes, those outlets will turn back on. "Alexa, ask Apex Fusion to start feed mode A" will launch the feed mode, resulting in those three outlets shutting off for ~5 minutes.

If you take it a step further, you can alias Feed Cycle A as "feed my fish" or something like that. Then you can say "Alexa, ask Apex Fusion to feed my fish" to start the process.
 
Thanks for your help Joe. How would I create an alias to shut off two Vortech pumps? It looks like only one item can be selected. Also, would a simple Echo Dot be a good interface for these voice commands?
 
Tidal Gardens
Thanks for your help Joe. How would I create an alias to shut off two Vortech pumps? It looks like only one item can be selected. Also, would a simple Echo Dot be a good interface for these voice commands?
 
Thanks for your help Joe. How would I create an alias to shut off two Vortech pumps? It looks like only one item can be selected. Also, would a simple Echo Dot be a good interface for these voice commands?
 
Thanks for your help Joe. How would I create an alias to shut off two Vortech pumps? It looks like only one item can be selected. Also, would a simple Echo Dot be a good interface for these voice commands?
 
Deltec
Thanks for your help Joe. How would I create an alias to shut off two Vortech pumps? It looks like only one item can be selected. Also, would a simple Echo Dot be a good interface for these voice commands?
 
ReeferDave71 said:
Thanks for your help Joe. How would I create an alias to shut off two Vortech pumps? It looks like only one item can be selected.
Click to expand...

Create one new, always-on, virtual outlet and name it something like "Wavemakers". In your two Vortech pumps' programming, add the following line:

If Outlet Wavemakers = OFF then OFF

Now when you turn off the Wavemakers virtual outlet, both Vortech pumps will stop until you turn the Wavemakers outlet back to AUTO or ON. Create an alias for the Wavemakers outlet instead of the two Vortech outlets to have a master shutoff without having to issue two separate commands.

ReeferDave71 said:
Also, would a simple Echo Dot be a good interface for these voice commands?
Click to expand...

I personally use an Echo Dot and I find it to be adequate unless the room is a bit noisy. I believe the Echo Plus and the Echo Show had the best noise-isolation out of the group of devices we've tested with.
 
Last edited:
When I ask Alexa for anything she says “please link your account in the Alexa app”. However, I’ve enabled the Apex Fusion skill on my Alexa app and logged in accordingly. What am I missing?
 
ReefBot Lab, Automated Water Tester
When I ask Alexa for anything she says “please link your account in the Alexa app”. However, I’ve enabled the Apex Fusion skill on my Alexa app and logged in accordingly. What am I missing?
 
Spike2484 said:
When I ask Alexa for anything she says “please link your account in the Alexa app”. However, I’ve enabled the Apex Fusion skill on my Alexa app and logged in accordingly. What am I missing?
Click to expand...

I'm looking into this now. Try unlinking your account and re-linking again to see if that changes anything.
 
WWC
I’ve done that with no luck.

Occasionally I can get Alexa to say “You have Apex Fusion enabled, would you like to open it”. If I say yes she says “welcome to apex fusion.....would you like to hear more”. If I say yes she says “sorry I’m having trouble accessing your apex right now”. If I say no, I get the same response as before.

I’m attaching a picture showing that I’m linked for what it’s worth.

22200B7F-A36E-4718-A9C1-B1F91737FBE6.png
 
Spike2484 said:
I’ve done that with no luck.

Occasionally I can get Alexa to say “You have Apex Fusion enabled, would you like to open it”. If I say yes she says “welcome to apex fusion.....would you like to hear more”. If I say yes she says “sorry I’m having trouble accessing your apex right now”. If I say no, I get the same response as before.

I’m attaching a picture showing that I’m linked for what it’s worth.

22200B7F-A36E-4718-A9C1-B1F91737FBE6.png
Click to expand...
I just configured my Alexa to give me status reports, start a feed cycle and turn skimmer and return pumps on/off. There are 2 steps - enable the skill in the Alexa app (looks like you did that). Then in your Apex dashboard, go to the Voice option. Here’s where you set up what Alexa can turn on/off or report status on. I’m a newbie on this, still fighting alarms on my ATK. ;-) But the Alexa integration is pretty cool.

2AFF3C4A-E6AD-49B9-8A69-A78A5A754F70.png
 
The alexa "open apex fusion" and getting my status report, lights on and off, etc is quite the breakfast conversation... Love it...
 
Nutramar Foods
How do I control 2 different Apex? How do I select which one is getting the command? I put commands in my Fowler tank, but it only seems to recognize the reef tank commands.

Also, what do you guys say to initiate a command. It is kind of lengthy to have to listen to the tutorial every time. I say "Open Apex Fusion." Then I have to wait while Alexa tells me the basic commands, Is there any way around listening to the basic commands?
 
Tidal Gardens
Considering to purchase a apex classic will Alexa work with that model through the fusion site?
 
Neptune

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Tidal Gardens
Deltec
Top Shelf Aquatics
Chewy.com
Nutramar Foods
World Wide Corals
TCK Corals
Dinkins Aquatic Gardens
New Posts
Back
Top