Apex Jr...Help!!!
- Thread starter LatinKing
- Start date
- Tagged users None
ngvu1
Valuable Member
So how did it go?
OP
OP
LatinKing
Clownfish Breeder
- Joined
- Sep 27, 2012
- Messages
- 954
- Reaction score
- 244
- Location
- Spring Hill, NPR
- What state or country do you live in
- Florida
New probe arrived yesterday temperature display 68.5 I just contact Neptune waiting to talk to the support team. Unless someone here has any suggestions.
OP
OP
LatinKing
Clownfish Breeder
- Joined
- Sep 27, 2012
- Messages
- 954
- Reaction score
- 244
- Location
- Spring Hill, NPR
- What state or country do you live in
- Florida
Temp probe was the issue! Replaced with a new probe, however this was not a quick fix. The display was registering 69 Fahrenheit. So I read a similiar issue with the temp probe on the Neptune support forum. Mentioning to use a temperature indicating tools, using 2-3 different types to get an average reading. Example: first reading 81.9 with a Pen style, second reading 82 with pocket probe, 3rd 82. 5 with temperature indicator. Then take the average of all 3 and calibrate the temp probe. These low cost tools price around $15.
In my case I calibrated the temp probe to 80.0
Once I thought I was finish, around 10PM last night my lights shut off, when there suppose to be schedule to turn off at 12 midnight. Apparently all setting were off, so I had to reprogram all controllers. I was thinking this was probably from updating the firmware. Anyhow, all is working! And thank those who contributed comments to this thread.
In my case I calibrated the temp probe to 80.0
Once I thought I was finish, around 10PM last night my lights shut off, when there suppose to be schedule to turn off at 12 midnight. Apparently all setting were off, so I had to reprogram all controllers. I was thinking this was probably from updating the firmware. Anyhow, all is working! And thank those who contributed comments to this thread.
