Apex time issue

[Zoajohn]

I have my return pump programmed to shut off when my eheim auto feeder comes on at 10:30am. The code I have is:
If Time 10:30 to 10:39 then OFF

It appears to be turning off an hour earlier at 9:30, despite only having one clock enabled, and correct time zone. Is there something I’m missing?

 

[Crabs McJones]

Do you live in a state that observes daylights savings time? I believe you have to go in and enable and disable daylights savings by selecting the little clock icon in fusion.

 

[Zoajohn]

Do you live in a state that observes daylights savings time? I believe you have to go in and enable and disable daylights savings by selecting the little clock icon in fusion.

This has gotta be it. Didn’t even think about it affecting a 24hr clock. I can’t seem to find the icon though, where in fusion is it?

 

[LiveWire]

I believe that you have to change that setting on the url page of your Apex or the display @Zoajohn it will be under system and then clock

 

[Crabs McJones]

This has gotta be it. Didn’t even think about it affecting a 24hr clock. I can’t seem to find the icon though, where in fusion is it?

Are you on PC or on mobile?

 

[Zoajohn]

Are you on PC or on mobile?

Mobile fusion. Can’t access the dashboard outside home IP

 

[Crabs McJones]

So on your fusion dashboard, select the gears to bring up more options

Then select the icon that looks like a little wall clock

And in there you should have the option to enable or disable daylights savings

Hope this helps

 

[Zoajohn]

So on your fusion dashboard, select the gears to bring up more options

Then select the icon that looks like a little wall clock

And in there you should have the option to enable or disable daylights savings

Hope this helps

My clock icon is greyed out it appears? I have the orange label apex and not sure if it’s disabled on that model

 

[Crabs McJones]

My clock icon is greyed out it appears? I have the orange label apex and not sure if it’s disabled on that model

What does the gear icon down at the bottom of your screen do?

 

[Zoajohn]

What does the gear icon down at the bottom of your screen do?

It shows this

 

[Crabs McJones]

Hmmm.How would you change the time on this unit? Does it give you any sort of time settings?

 

[vetteguy53081]

Click on clock to this page

As in mine, the two clock times should match ( in my case, theyre not an hour apart but the same)

 

[Zoajohn]

Hmmm.How would you change the time on this unit? Does it give you any sort of time settings?

The way I did it previously was in the classic dashboard via my units IP address. My fusion looks different than both of yours and I’m not sure why. Are you running a 2016 apex? That’s the only difference I can think of thatbwould cause this.

 

[Crabs McJones]

The way I did it previously was in the classic dashboard via my units IP address. My fusion looks different than both of yours and I’m not sure why. Are you running a 2016 apex? That’s the only difference I can think of thatbwould cause this.

I'm running the newer Apex EL, but I dont' know if fusion is different between the two. Where on your fusion dashboard does it show the time? is there a little gear icon next to it you can press? otherwise the only other spot I can think of is the menu bar above and go to settings in there. (The three dashes next to Apex Fusion on top) @rkpetersen @DarthSimon

 

[Zoajohn]

I'm running the newer Apex EL, but I dont' know if fusion is different between the two. Where on your fusion dashboard does it show the time? is there a little gear icon next to it you can press? otherwise the only other spot I can think of is the menu bar above and go to settings in there. (The three dashes next to Apex Fusion on top) @rkpetersen @DarthSimon

I’ve looked everywhere in fusion and there’s no way to change the clock settings. Only the clock icon on bottom bar but that is greyed out and can’t click on it.

 

[Crabs McJones]

I’ve looked everywhere in fusion and there’s no way to change the clock settings. Only the clock icon on bottom bar but that is greyed out and can’t click on it.

#reefsquad any apex classic or orange label users know how to adjust daylights savings?

 

[vetteguy53081]

The way I did it previously was in the classic dashboard via my units IP address. My fusion looks different than both of yours and I’m not sure why. Are you running a 2016 apex? That’s the only difference I can think of thatbwould cause this.

Yes 2016 unit. Let me check my classic on another tank

 

[DLHDesign]

Did you ever use the old Apex app? If so, there was a setting there to use your local device time (e.g.; your phone’s clock) instead of NTP (internet time). The new Fusion app doesn’t have that option, but if that switch was previously flipped, it might still apply.

Are you on the latest version on your Apex? If not, I would suggest upgrading as that may reset the setting (or clock, at least).

If your Apex isn’t connected to the internet normally, then you may want to try putting it temporarily online to allow it to sync the clock.

 

[homer1475]

Classic dashboard on the classic apex > Configuration > Clock setup

To access the classic dashboard you have to go to a PC on your network, type in the IP addy of your apex, then your username and password.