Apex Wave pump

Truebluereefs · Oct 1, 2019

who knows about setting up the apex WMV (wave pump) the system says its on at 44% but no flow coming from the pump.
I have not set up my own wave pattern or flow just the standard setup that comes pre-installed.

SuncrestReef · Oct 1, 2019

I'd recommend deleting all but the first and last program points (00:00 and 23:59), then adjust them to see what intensities work well for your tank. This will also tell you if the pump is actually functional. Some of the built-in programs vary the speed or even stop it, so perhaps that's why you don't see any movement. If it doesn't run when set to Constant, then there's an issue.

Truebluereefs · Oct 1, 2019

or deleted the first point, and adjusted the times some but still dont get a flo or RPM, temp is now at 50%.

ca1ore · Oct 2, 2019

How is the WAV getting it’s power? I ran mine through the 1link and was always having issues with the integrity of the plugs. Mostly the 1link power supply, but also the plugs on the ends of the WAV cords. Ultimately I concluded they were more trouble than they’re worth and I mothballed them.