Hi , unfortunately I couldn't solve the problem.
Thank you. I still cant connect in the other mode. However I finally figured out how to in the AP mode. I thought it required my Wi-Fi password off the router ie network connection. I finally used the code in the book as a lark 12345678. Bingo I thought it was just an example. So yes if anyone else is having trouble, be patient. The APP is not the connection route. You have to get to the Wi-Fi setting using the menu on the actual light. Make sure it is in AP mode, again be patient. It will confirm on the screen, then push escape until you are back on the timer screen. The light will send a prompt in your settings under Wi-Fi. Then enter 12345678 when you get to password section.I don't know if they are out of service or not.
But Try this :
1) At first go to your wifi setting in your cell phone and disconnect from internet.
2)Use aquanest M8
-wifi config>AP mode > yes
3) check your wifi setting on your cellphone again and know you can see aquanest serial number in the around networks.connect it
4) know check your aquanest application on your phone .you can see your gadjet name and manage it.
You have to connect and order them separately. Do the same for other one.
I hope, it would be useful
Use insert+ and add more time to schedule lighting.So here is my schedule. I watched a video, and it was suggested that you must start and end with zero on al channels. Weird that I only have 10
What should I expect when I turn on the second light? Will it connect separately? My first 5 channels are running at 50%. the other 2 at 15%
?
I am not using it at the moment. I am waiting 4 months as suggested by Bulk Reef Supply video ( skip the ugly stage ). They also have a video, they used a Par meter and found the sweet spot in their application to be 8 inches off the top. Also that is where I got that information regarding the intensity. Without a par meter it is pretty difficult to defend their position, or to disregard it. To answer your question. The level of brightness does go to 100%. What that means? Again I do not know. The light does get very bright at 50% I have been running it since You Guys helped me, but not on the Aquarium.
Thought it would be interesting to show you the lighting for real. As I was saying every tank is different so they say. Which makes sense. The lights are 9.5 inches of the top of the tank. Pictures were taken at 8:15, !0:15, and 18:30. So now I will do resets according to what you showed me. I did find those settings, I assume I will have to cancel
what I have on the schedule now
Wow let me know how much you pay for a Par meter I was looking is out of my league. As far as what I meant I am going to try all the settings. Yours and LPS, and SPS, and use my calibrated eyes lol. Unless I can find a PAR meter to rent.
