Aquastyle leds.

[CLR48]

Does anyone know how to hook up this kit it's aquastyle kit with the controller.
I'm getting one more driver and one more #2 board and one more #3 board

Sent Via the R2R Forum APP

 

[Bartmmackey]

Why do you have those gold drivers? Was that part of your kit? Power feed goes to first drive and then those to LEDs. Want a pic of mine?

 

[CLR48]

Yes please.



Sent Via the R2R Forum APP

 

[CLR48]

To power the leds because I have like 80 leds


Sent Via the R2R Forum APP

 

[Bartmmackey]

Let me mark this up

 

[CLR48]

Can I get a close up of the wires from the silver box to the circuit board?


Sent Via the R2R Forum APP

 

[Bartmmackey]

PM any questions. I guest the yellow/gold drivers you have step power up inline to LEDs? Don't know about that aspect...mine are within the suggested number of leds per board...like 7 per.

other guys are smarter than me...just trying to help....so lets see if they pipe in....

 

[CLR48]

Just one question which port in the silver do you plug the power wire that goes to the circuit board


Sent Via the R2R Forum APP

 

[Bartmmackey]

I used red pen where I used a black wire.

 

[Bartmmackey]

Want a closer pic?

 

[CLR48]

Okay cool thanks! But yeah because I have a 150 gal I can't really do 7 leds per


Sent Via the R2R Forum APP

 

[Bartmmackey]

I get the drivers bump up power on the other side of the board. Only word of caution make sure you keep polarity squared away. Otherwise no workie.

 

[Bartmmackey]

I made little paper squares and labeled them like models of each LEDs so I could play with layout. Then made this map to keep it straight. It helped when programming the timer. Just a suggestion. Also helped with layout cause couldn't easily tell diff in led colors if not lit

 

[CLR48]

So where exactly do. Hook up the drivers? N the led side of the board or the other side?


Sent Via the R2R Forum APP

 

[Bartmmackey]

I would "guess' the Led side...in line of the power "to" the first led. You can email them...they were great for answering questions. I would mock it up and take a pic or diagram it to better explain to them.