- Joined
- Feb 12, 2017
- Messages
- 35
- Reaction score
- 9
I am running a ASM skimmer and just a few days ago it started to foam out of the sides and top of the cup. I have adjusted the outlet tube with no change. Any suggestions would be appreciated.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ok I will try that, thanks!The water level in the sump is too high. It is hard to accurately tell, I would guess the water level should be lowered 2-4" or somehow put something under the skimmer and get it higher
I am. It sure if I can adjust that.Can you adjust the air intake??
What type of mysis?? Certain brands make my skimmer act goofy.
I use PE
How long has the skimmer been running in your system??
Skimmer has been running since day one, about 5 weeks.
Did you just recently start dosing NOPOX?
I started dosing NOPOX on day two of the cycle.
It's more than likely something very simple and nothing to be overly concerned about but if you are concerned about a possible pollutant then I'd suggest running carbon. I use a carbon pad in the sump baffle that the water runs through. I have been thinking about a carbon reactor.
Did this happen right after a filter sock change ?? Right after dosing anything? Right after feeding?
I don't think so.
If you can adjust the air then I'd suggest closing it off a little to get it to settle down.
Thanks I will check that.My old Euro Reef skimmer would do that when the air holes in the skimmer cup lid got clogged. Foam would come out from under the lid in the sides like in your picture.
Not to sound ignorant, but would a high water level in the sump cause?Ok I will try that, thanks!
Not to sound ignorant, but would a high water level in the sump cause?

