ato setup

[Jose102173]

What are some ways I can setup my ro/di to my ato reservoir? My 110 DT will be filled by means of a tunze osmolator 3155 and ato reservoir. Now looking to fill my ato from my ro/di automatically. I do have an apex controller (not setup yet) Pictures of these setups would nice.
Thanks,
Jose

 

[Windy]

Well in my opinion, you asked too late. You already have the tunze. I recommend a simplistic approach. Use float valves in your sump and storage container fed by your rodi system. But, with an apex and two float switches, you can make your own tunze for both uses.

 

[bevo5]

It's the same basic set up as the ato reservoir to tank. You could easily set up float switches in your reservoir to the breakout box on your apex. The low water switch would trigger the pump from your Rodi and turn it off when it reached the high water switch.

Just depends how far away the Rodi is from your reservoir. you've gotta run the tubing all the way etc.

Might be less of a hassle to just get a bigger reservoir and refill it manually ever week or two as needed. I use a 30g brute for the top off on my 200. I'm getting about 10days out of that before I have to refill. I put a low water switch in there to alarm if the water gets too low.