Battlecorals Snipes Blue Discussion Thread

Users Who Are Viewing This Thread (Total: 0, Members: 0, Guests: 0)

Jump to Last
Been fighting cyano after getting rid of my Dino’s, so I’ve had 2x 3-day blackouts in the last month. Doesn’t seem to be hurting the growth though....encrusting well and good color:

1A1712BA-E97C-4A2D-AB55-20A97267D123.jpeg


2E92CD5C-1798-4620-8902-405239CA6274.jpeg
 
wow, some of you all have some great growth so far! nicely done!
 
Don’t have great news. I noticed my blue snipes frag was not looking too good and was STN a little from the base. I took it out and dipped it and then fragged it hoping I can save it.

I am not sure what this pest is that came off in the dip and I could use some help figuring this out. Here is a link to a short video that I took and a crappy photo.


97E8E5FC-4BF8-415F-94B0-F9DF23FECA36.jpeg


I don’t think it looks like AEFW, but then again I have never seen one before so not sure. I am praying this is just a harmless creature.
 
Ento-Reefer said:
Don’t have great news. I noticed my blue snipes frag was not looking too good and was STN a little from the base. I took it out and dipped it and then fragged it hoping I can save it.

I am not sure what this pest is that came off in the dip and I could use some help figuring this out. Here is a link to a short video that I took and a crappy photo.


97E8E5FC-4BF8-415F-94B0-F9DF23FECA36.jpeg


I don’t think it looks like AEFW, but then again I have never seen one before so not sure. I am praying this is just a harmless creature.
Click to expand...

I am not sure what that is, but I recommend you start a thread in the "Hitchhiker and Critter ID" forum. I think you will get rapid and helpful info there.
Good luck with your Snipers. Are any other acros in your tank showing signs of distress?
 
kurtp said:
I am not sure what that is, but I recommend you start a thread in the "Hitchhiker and Critter ID" forum. I think you will get rapid and helpful info there.
Good luck with your Snipers. Are any other acros in your tank showing signs of distress?
Click to expand...

I have a few that are just in a stall, but I have not noticed any distress. One of my bonsi did have a few tips that lost tissue, but that is it. The majority of my acros have actually just started to really take off with growth in the past 6 weeks. I’m stumped but I will dip a few more tonight that are easy to get and not encrusted on the rocks yet. I am hoping I don’t have a bad pest. I dip everything, but don’t have a qt system for corals.
 
September entry is posted. Going to hang my Kessils on either side of my halide to get some more light to the sides of tank. Trying to figure out how to fit a couple t5 over the tank as well. Kinda want to try out a halide/led/t5 combo. I already have everything. Just need to figure out how to fit it all above the tank. My halide reflector is as wide as my tank is. So that makes it kinda challenging.
 
MTBake said:
September entry is posted. Going to hang my Kessils on either side of my halide to get some more light to the sides of tank. Trying to figure out how to fit a couple t5 over the tank as well. Kinda want to try out a halide/led/t5 combo. I already have everything. Just need to figure out how to fit it all above the tank. My halide reflector is as wide as my tank is. So that makes it kinda challenging.
Click to expand...
I can try to help share some photos I was able to do this with mine took a week or two but well worth it
B70C18A6-4ACD-48FB-BF9D-02A601929AA4.jpeg
 
Please remember if you have not, you must post your update photo this month in the official pic thread.
 
justingraham said:
I can try to help share some photos I was able to do this with mine took a week or two but well worth it
B70C18A6-4ACD-48FB-BF9D-02A601929AA4.jpeg
Click to expand...

That beast of a lighting setup is kinda what inspired this whole idea;)

I'll have 2 kessil 360we with a 250w 14k Phoenix halide in the middle. I'm going to make a bracket at work next week out of aluminum that will mount to the halide reflector shell so I can mount the t5 reflectors. I'm also bringing the top shell piece to work so I can cut it out for a 4" 110v fan to help with heat issues. I'll have that turn on and off with my halide.
 
Very impressive guys....My poor little T5 lit Snipers don't stand no kind of chance at all:(
 
Ur fixture gets that hot?
I can touch mine
Plus I have an open top canopy so none of the heat get trapped
I prolly should have a small silent fan just bringing in new air couldn’t hurt
 
Fishfinder said:
Ya right, your frag has some of the best encrusting so far
Click to expand...
I was just messing with the other guys, of whom I am definitely jealous of their awesome set ups (definite 'Fixture Envy").
We are just barely out of the gate, but overall, I am very pleased with how my frag is coming along, but remember, mine was in my tank a few weeks before the others were shipped so after adjusting for the time difference I estimate its right there in the middle of the pack. I mostly entered this contest to learn, and I really like how we are all sharing our techniques and it'll be cool to see how these different set ups all pan out (plus its sweet to dream a little about maybe Seabiscuiting in at the finish line and winning that $700 battlebox out from under War Admiral's nose.)
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%

  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%

  • No.

    Votes: 26 37.1%

  • Other (please explain).

    Votes: 3 4.3%
See comments…

New Posts

Deltec
Chewy.com
Dinkins Aquatic Gardens
TCK Corals
Tidal Gardens
Top Shelf Aquatics
Nutramar Foods
World Wide Corals
New Posts
Back
Top