Biocube 14 galloon

[j90ramos]

Pickup a used biocube 14 gal and wondering what type of return pump and filtration I would need for this tank. Maybe wave maker as well or too small for one.

Thanks

 

[Peace River]

You may want to look at the Sicce 1.0 or similar for the pump. Also, take a look at the build thread section and search for other bio-cubes for inspiration. Good luck with whatever you choose!

 

[j90ramos]

You may want to look at the Sicce 1.0 or similar for the pump. Also, take a look at the build thread section and search for other bio-cubes for inspiration. Good luck with whatever you choose!

thanks for the help. Yeah only see 32 gallons build but not much 14 gal but I’ll keep looking.

 

[MoMoTheMonster]

I recently had to replace my return pump on my 14g biocube. I picked up a cheap one on Amazon:

DOMICA 220 GPH Ultra Quiet Fountain Pump, Small Submersible Pump (15W 800L/H) for Pond, Water Feature, Aquariums, Hydroponics, Indoor or Outdoor Fountain https://a.co/d/9wuhMot

Only $15. It's a little stronger than the original pump.

Here is the original pump:

Coralife 14 BioCube Replacement Pump https://a.co/d/49YZV3l

Also I'm using this wave maker:

hygger Mini Wave Maker Magnetic DC Powerhead with LED Display Controller for Saltwater Tank, 1600 GPH Aquarium Water Circulation Pump 5 to 30 Gallon, Black https://a.co/d/iR89Mt4

I have bioballs in the very bottom of the second chamber and I only run filter floss through the first chamber with the heater. I also have ATO sensor in return chamber at the max water line.

Best of luck with your new tank!

 

[j90ramos]

I recently had to replace my return pump on my 14g biocube. I picked up a cheap one on Amazon:

DOMICA 220 GPH Ultra Quiet Fountain Pump, Small Submersible Pump (15W 800L/H) for Pond, Water Feature, Aquariums, Hydroponics, Indoor or Outdoor Fountain https://a.co/d/9wuhMot

Only $15. It's a little stronger than the original pump.

Here is the original pump:

Coralife 14 BioCube Replacement Pump https://a.co/d/49YZV3l

Also I'm using this wave maker:

hygger Mini Wave Maker Magnetic DC Powerhead with LED Display Controller for Saltwater Tank, 1600 GPH Aquarium Water Circulation Pump 5 to 30 Gallon, Black https://a.co/d/iR89Mt4

I have bioballs in the very bottom of the second chamber and I only run filter floss through the first chamber with the heater. I also have ATO sensor in return chamber at the max water line.

Best of luck with your new tank!

Thanks you so much. This was very helpful on getting this started.

 

[X-37B]

I run a Tunze 1073.008 on my 20g and next 15g. Great pump for the money.

 

[j90ramos]

I run a Tunze 1073.008 on my 20g and next 15g. Great pump for the money.

Thank you. How about filtration?

 

[X-37B]

Thank you. How about filtration?

In my 20 I run 3 baskets, 2 eheim substrate pro and 1 matrix.
Carbon and po4 reducer when needed.
I also run a diy air driven slimmer.
I have an icecap nano for the 15 but its not up yet.
The 20 is all live rock from my other systems.
Was working on system today and its now ready for growout phase.
Tank is 3 1/2 months old.
Just took these.
Still dialing in the K7. Its full sps program from noopsyche.

 

[aaron7]

Thank you. How about filtration?

I have a 32 gallon biocube. I use the intank media baskets in the back compartments. They make one for 14 gallon too

 

[j90ramos]

I have a 32 gallon biocube. I use the intank media baskets in the back compartments. They make one for 14 gallon too

Do you happen to have a link for it? Thanks

 

[aaron7]

Do you happen to have a link for it? Thanks

Coralife BioCube 14

intankaquatics.com

 

[19Mateo83]

Check out the build thread for my 14g

Build Thread - 19Mateo83’s 5 & 14 gallon builds

5g update! I think I may have beaten my Dino’s? Not really sure if that’s what they were but here it is tonight. Brought the phates and trates up with neophos and neonitro. I also added more astrea snails bringing the total up to 8 in this tiny tank. They are chewing my uglies away. My...

www.reef2reef.com

 

[aaron7]

Also, I’m sure you’re more than aware but if you picked up a used tank I would definitely run a water holding test on it first. Fill it up with water and watch for leaks before you stock anything

 

[j90ramos]

Also, I’m sure you’re more than aware but if you picked up a used tank I would definitely run a water holding test on it first. Fill it up with water and watch for leaks before you stock anything

Thats what I'm doing now before buying all these thing

 

[kevgib67]

For my Biocube 32g , I based much of my filtration on the YouTube video: Coralife Biocube Basics, simple filter modifications. I hope it helps.

 

[j90ramos]

For my Biocube 32g , I based much of my filtration on the YouTube video: Coralife Biocube Basics, simple filter modifications. I hope it helps.

Thanks I will check it out

 

[indiana812]

I’ve tried a lot of mods, went rimless, built a custom hood for my AI 16HD. Best mod I did was 14g intank divider. I tried to make my own DIY for like 6 months and it never worked lol. Finally pulled the trigger.

 

[Caltmann]

I’ve tried a lot of mods, went rimless, built a custom hood for my AI 16HD. Best mod I did was 14g intank divider. I tried to make my own DIY for like 6 months and it never worked lol. Finally pulled the trigger.

Hello, I have the 14gl bio cube and intrigued by this divider you mentioned… As in where it’s at and how it works?

 

[Dcal]

Hello, I have the 14gl bio cube and intrigued by this divider you mentioned… As in where it’s at and how it works?

If youre still looking!