Brass fittings on garden hose

  • Thread starter Thread starter Myka
  • Start date Start date
  • Tagged users None

Myka

Valuable Member
View Badges
Joined
Jul 16, 2015
Messages
1,041
Reaction score
676
Location
SK, Canada
Rating - 0%
0   0   0
I have a garden hose with brass fittings hooked up to a pump which I use to transfer saltwater from my mixing tub to my sump. Between uses the fittings dry. After three years of this the fittings are slightly greenish, and if I rub them with a towel the green doesn't come off. Is this a potential problem, or is it ok since the fittings aren't submerged for long periods?
 
Wouldn't catch me doing that, the green is oxidization of the brass(made with copper), and any opportunity to avoid copper getting into your tank should be avoided.

Can you try using clear vinyl tubing to pump the water? Or possibly find a hose with plastic fittings.
 
Wouldn't catch me doing that, the green is oxidization of the brass(made with copper), and any opportunity to avoid copper getting into your tank should be avoided.

Can you try using clear vinyl tubing to pump the water? Or possibly find a hose with plastic fittings.

Clear vinyl tubing sucks, it's not very flexible. I'm going to replace the fittings with plastic ones this weekend to appease a friend of mine, but we have a bet going... My theory is the amount of copper coming off the fittings is nearly nothing - especially compared to products like ZeoSpur2 where people purposefully dose their SPS tanks with copper to bleach them (possibly as much as 130 ppb). If I was keeping the fittings submerged in saltwater, then I'd agree that it could be a significant threat. But we have a bet going here... :D
 
Cut the brass ends off and buy the plastic repair couplings to replace them. Only a couple bucks and peace of mind.
 
@AZDesertRat Yeah, I already bought them just so he'd quit whining at me. One day I will swap the fittings out. Until then, the bet is still on. o_O

I wouldn't do it, but it is hard to quantify the amount that is likely to be released.

Dr Randy, your answer is too diplomatic, and now we are at a stalemate. :mad: :p
 
@AZDesertRat Yeah, I already bought them just so he'd quit whining at me. One day I will swap the fittings out. Until then, the bet is still on. o_O



Dr Randy, your answer is too diplomatic, and now we are at a stalemate. :mad: :p

Such is life without data. :D
 
Two brass fittings of unknown weight and surface area dipped for a few minutes in an unknown volume of water many times over a few years with evidence of mild corrosion isn't enough "data"? :D


Sorry. :D
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top