BRS RODI not producing water

[Night_shift_reefer_]

hey everyone. Quick question about my 4 stage BRS RODI system.

I just changed my old RODI system to a new BRS 4 stage one. My old system constantly dripped water pretty slow. I installed the new BRS one and it is producing tons of waste but no actual product water? I installed it about 2 hours ago so maybe it just needs time? Pressure is about 70 psi so it is not a pressure issue. Any advice would be great

 

[bebaugh]

Check that the valve used to flush your RO membrane is in the correct position.

 

[Night_shift_reefer_]

Check that the valve used to flush your RO membrane is in the correct position.

I have been seeing people saying that but I cannot locate a valve on this system at all. Any thing i am missing?

 

[bebaugh]

That looks different than my BRS RODI setup.

 

[cwalton00]

You just have a flow restrictor and no flush valve. Could be an issue with the restrictor or you have something hooked up wrong?

 

[Night_shift_reefer_]

You just have a flow restrictor and no flush valve. Could be an issue with the restrictor or you have something hooked up wrong?

I think I’ve figured it out. I moved the rodi into my bathroom and it worked perfect. I must have some flow restriction somewhere. At least I’m headed in the right direction i think.

 

[cwalton00]

Hmm if you had a kink in the blue product line it would trigger the auto shut off but that should cut the waste water too.

 

[Night_shift_reefer_]

Hmm if you had a kink in the blue product line it would trigger the auto shut off but that should cut the waste water too.

Its where the line is tapped from. I bought this house with a mixing station already installed and the guy used a saddle valve to tap into a water line. The saddle valve was rusted and causing blockage on psi

 

[Fudsey]

Ya saddle valves are the worst. Can cause all sorts of problems with water leaking and rust.

 

[Night_shift_reefer_]

Does anyone know where I can get a pressure valve for the tubing that comes off the saddle valve to check my psi? I saw the one on BRS but 20$ seems high to me