Bubbles in media

[sammy1028]

I have the aqua max T2 calcium reactor I just changed the media out and we are having a problem with major bubbles. The bubbles are flowing inside the reactor and we don’t know what to do. How do we get the air bubbles out when we change the media?

 

[Salty Rambler]

I don't have any tips for the bubbles, but I did want to say welcome to R2R!

 

[vetteguy53081]

Shake the housing and even increase he bubble count and effluent temporarily- should calm it down

 

[vetteguy53081]

 

[Fred2482]

Welcome!

 

[00W]

Welcome to R2R!

 

[G Santana]

Welcome to R2R

 

[MERKEY]

Hello and welcome to R2R!

 

[CMMorgan]

Welcome to the fishy family! I hope you work it out.

 

[maceto]

Welcome!

 

[SPR1968]

Welcome to R2R!!!

 

[lelandmarine]

WELCOME!
Here are some resources you may like

If you like to read

The Supreme Guide To Setting Up A Saltwater Reef Aquarium

This article was sponsored by @MarineDepot at www.marinedepot.com. Introduction The marine environment is one of the most complex systems on the planet. The aquarium you are about to set up is only a tiny sliver of the vast ocean, but it is no...

www.reef2reef.com

If you prefer video’s. This video series is “5 minute guide”, good info. BRS TV has lots of different series.

Here’s a getting the most out of Reef2Reef link

Tips for Getting the Most From the Reef2Reef Forum

Tips for Getting the Most From the Reef2Reef Forum Clown Triggerfish, Balistoides conspicillum. Photo is from the Reef2Reef archives, courtesy of @Darryl, ©2019, All Rights Reserved. If you're new to online discussion forums or just new to Reef2Reef, this article is for you. Much of the...

www.reef2reef.com

 

[ShepherdReefer]

Hello and welcome to the channel

 

[Jimbhoy13]

Welcome to R2R

 

[KJ]

Welcome to R2R!!!

 

[Peace River]

Welcome to Reef2Reef!!! One option is to install a purge valve. Although it shows a different Aquamaxx reactor, the following YouTube video should provide a general idea:

 

[Jeffcb]

Welcome to Reef 2Reef!

 

[BeltedCoyote]

Welcome to R2R!!!

 

[Fish Think Pink]

I have the aqua max T2 calcium reactor I just changed the media out and we are having a problem with major bubbles. The bubbles are flowing inside the reactor and we don’t know what to do. How do we get the air bubbles out when we change the media?

Welcome!

Post #3 seemed to have good advice. Hoping by now it has calmed down for you

 

[BaysEndReef]