Building an 'evil cluster' - DIY LED on steroids

[ReefLEDLights]

PAR



NW @ 1A

NW at 700mA

L/C at 1A

L/C at 700mA

RB at 1A

RB at 700mA

B/R at 700mA

V at 1A

V at 700mA

All LED at 1A (except B/R at 700mA)

All LED at 700mA

2x Blue Plus

All LED at 1A (except B/R at 700mA) with 2x Blue Plus

All LED at 700mA with 2x Blue Plus

What about the PAR with just LEDs.

T5s are expensive and personally I choose not to use them as a spectrum fix.

Bill

 

[jedimasterben]

What about the PAR with just LEDs.

T5s are expensive and personally I choose not to use them as a spectrum fix.

Bill

They're in there.

All LED at 1A (except B/R at 700mA)

All LED at 700mA

They are indeed expensive as a spectrum fix, but this array does not need that. They are for light fill, something that LEDs really can't do.

 

[cmaklary]

Hi im looking for info on light drivers ? dont know what one you used? Im have ldd 1000h but not sure how to wire the dimming ? If you do can you tell me?
Thanks

 

[jedimasterben]

All you do is wire the PWM pin to your controller's PWM output.

 

[cmaklary]

Im using the hyphon not sure if it has pwm output?

 

[jedimasterben]

The Typhon has both 5v and 10v PWM outputs.

 

[cmaklary]

So ok i hooked the pwm from the typhon 5v - to the - on the power supply + to the lld1000h but will not dim? what am i doing wrong?

 

[jedimasterben]

Not sure so long as you have it grounded properly. Snap some pics and PM me about it.