Doesnt yours have the euro bracing? I feel like you are handy enough to build some screens to rest on top of the bracing.
Yes it does and yes I am.. it's less about the building of the acrylic/polycarbonate frames, and more that I kind of suck at inserting the netting material at the correct tension. A bit loose and it says. Too tight and it'll warp the frame. I'm sure I'll end up building them. Just wanted to see what it would cost to have someone else do it.
Wow had no idea they were that expensive!
I'll essentially need four 2' x2.5'. their 90 cube should be about the same dimensions so I extrapolated from there. It gets spendy
Material isn’t cheap nowadays. Most lids are 3/8” polycarbonate which is $400 a sheet 4ft by 8ft depending on location..
Maybe this is dumb… but if there is someone local or even with cheap shipping that makes custom window screens, it might be worth looking into. Could be way cheaper than the acrylic and then you don’t have to worry about the tension issues.
I have window screens there now, made local.
I’m guessing mine is around 6.7
The shoddy jump net that comes with these tanks does not account for cords
Window screens that aren't the right sized.
Most of the time, ribbons wont hunt for an exit unless under extreme conditions of feeling unsafe, insecure, not welcomed. Do you have a glass rim on the inside? Like this
www.menards.com
Yes. The entire tank is euro braced top and bottom.Most of the time, ribbons wont hunt for an exit unless under extreme conditions of feeling unsafe, insecure, not welcomed. Do you have a glass rim on the inside? Like this
