Calibration Of Vectra M2

ShaggyRS6 · Nov 5, 2019

Hi folks, if you have ever followed any of my other threads, you will know that i have recently been having some trouble with constantly having to adjust my over flow height using the tuning knob on my WB. In the evening I will set the height so that the water level is an inch or two below the emergency drain and by morning the water level is over flowing into the emergency drain. I turn the knob to the left and the water level drops. When I get home it fine still but at about 6:30 it starts to drop again and I have to readjust!

I am assuming its one of two things. Either the VorTech pump I have in the tank is doing something when
It changes between modes or the return pump, the M2 is not pumping at a constant speed.

I have it set to 35% but I have never calibrated it. I tried once and it sent so much water into the sump it was bubbling over the first section from the plumbing!

i just wanted to get your thoughts!

Phil D. · Nov 5, 2019

It's best to calibrate it. I was having the same issue of water level changing until I calibrated.

ShaggyRS6 · Nov 5, 2019

Phil D. said:
It's best to calibrate it. I was having the same issue of water level changing until I calibrated.

Hmm well that’s what i needed! Thanks bud.

mike550 · Nov 5, 2019

I calibrated my M2 as well. It’s a pain to do if you try to follow the printed directions as it doesn’t do a very good job explaining the process. There’s a video on the ecotech website (maybe under support) that does a really nice job guiding you through the process.

ShaggyRS6 · Nov 5, 2019

mike550 said:
I calibrated my M2 as well. It’s a pain to do if you try to follow the printed directions as it doesn’t do a very good job explaining the process. There’s a video on the ecotech website (maybe under support) that does a really nice job guiding you through the process.

It should be simple I have the Ecotech live, but I tried it twice before and it just freezes. Not a great device for network stability hard wired or wireless!

If my 50 dollar Alexa can keep connected all day I’d certainly expect the Ecotech live too! I don’t ask for much!