Can you have multiple settings on Eccotech lights?

[Paul Thomas]

I have three XR30's. Two G4 and one G3. The G3 is a little dimmer than the other two and I would like to adjust it a bit higher to compensate. The adjustments on these lights are all controlled in one profile so they are always on the same settings. Is there a way to set up your Eccotech lights on different settings?

 

[PeterC99]

Looking at Mobius, I’m not sure this could be done through the profile.

Would it be possible to do this through the Calibration setup in the lights settings?

 

[oreo54]

Looking at Mobius, I’m not sure this could be done through the profile.

Would it be possible to do this through the Calibration setup in the lights settings?

Sooo what would one do if one had say 3 tanks and 3 lights but wanted separate lighting for each tank?

Which is really what the o/p needs to do.. Set one "set" as the 2 new ones.. one as the old as if it were 2 separate tanks.

Just "add a tank"

https://ecotechmarine.com/wp-content/uploads/2020/04/Mobius_QSG_033020.pdf

 

[blaxsun]

If they’re attached to separate tanks, yes.

 

[oreo54]

If they’re attached to separate tanks, yes.

Just "pretend".. so one "tank" is the 2 g4's the other is a g3...
Should be able to adjust each "tank" separately.

Both tanks having the exact same schedule with the one "tank" either w/ less global dimming or more.. depends on the "tank"..
If the clock works shouldn't be too much of a problem.

Call one tank "Two G4" and one "G3".
At least that is how it plays out in my head..

Calibrate function may work as well .. if you can calibrate each light head, which you should be able to.

Radion G5: Calibration

Overview A calibration dials in the exact output of each individual diode on your Radion(s). This ensures precise spectral output during lowlight periods and is recommend for all Radion users. Pe...

support.ecotechmarine.com

but it looks "clunky" and more for color adjustment.

 

[Paul Thomas]

Sooo what would one do if one had say 3 tanks and 3 lights but wanted separate lighting for each tank?

Which is really what the o/p needs to do.. Set one "set" as the 2 new ones.. one as the old as if it were 2 separate tanks.

Just "add a tank"

https://ecotechmarine.com/wp-content/uploads/2020/04/Mobius_QSG_033020.pdf

Makes sense, thanks