Cant get Acan to Open Up Lighting? Flow?

  • Thread starter Thread starter KDG730
  • Start date Start date
  • Tagged users None

KDG730

Community Member
View Badges
Joined
Jun 6, 2018
Messages
94
Reaction score
31
What state or country do you live in
New Jersey
Rating - 0%
0   0   0
Hey guys new reefer here having trouble with my acan opening. Rest of my lps corals seem ok for the most part

I have zetlight led running relatively low settings about 30-35x flow
In sand bed have moved a couple times with no luck

Sometimes its a bit more open but today looked this bad
parameters are all solid

Is this most likely too much light why they dont open? Do i need it even lower?
 
Is it getting any direct flow? They usually don’t like that.
 
Do you have any pics? If your parameters are vastly different from the environment it came from it can take a week or more to open.

It usually is a bit more open than this but today i came home to see this. Seems like it doesnt like something most im reading says they like low light though? So i cant imagine i need to turn the light higher

560086A3-5C48-417A-925C-4A12A041DDE5.jpeg
 
Moderate lighting. moderate flow, feed 2-3X per week, salinity 1.025-1.026, temp of 77-78 and ph range 8.0-8.2
 
Moderate lighting. moderate flow, feed 2-3X per week, salinity 1.025-1.026, temp of 77-78 and ph range 8.0-8.2

Thanks im in all those ranges and feeding Could the pic be too little light? I only have blues ramping to about 40% white to 25% ish im afraid to bleach anything with too much. Zetlight qmaven 6800
 
I have found that Acans seem to like blue light a lot more than white until they r established, when my tank was strictly lps I had a maxspect razor 200 watt and ran blues at 90 percent and the acans loved it. After several months I started to turn up the whites to get ready for sps and I did that slowly, and to a point they actually loved it.
 
I have found that Acans seem to like blue light a lot more than white until they r established, when my tank was strictly lps I had a maxspect razor 200 watt and ran blues at 90 percent and the acans loved it. After several months I started to turn up the whites to get ready for sps and I did that slowly, and to a point they actually loved it.

That makes sense because it actually opens the most at nighttime lights which are strictly blues maybe ill give that a go
 
That makes sense because it actually opens the most at nighttime lights which are strictly blues maybe ill give that a go
I would run strictly blues for a week at high values and see what it does, remember, blue don’t have the par value of whites which is why U may need to ramp it up. After a little while U can start to reintroduce whites, I guess I would error on the side of caution and turn my whites up 2 percent weekly. Hope it works for you!!!
 
I just posted some information on another thread with the header... Acan Troubles Hope it helps :)
 
I would run strictly blues for a week at high values and see what it does, remember, blue don’t have the par value of whites which is why U may need to ramp it up. After a little while U can start to reintroduce whites, I guess I would error on the side of caution and turn my whites up 2 percent weekly. Hope it works for you!!!

I will try this thanks
 
So far this has been great using mostly blues acan opening up day by day. I love the look of the tank overall as well

Thanks guys!!
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 32 45.7%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 12.9%
  • No.

    Votes: 26 37.1%
  • Other (please explain).

    Votes: 3 4.3%
Back
Top