Cheapest overflow that is still quiet and skims the surface?

  • Thread starter Thread starter NeveSSL
  • Start date Start date
  • Tagged users None

NeveSSL

2500 Club Member
View Badges
Joined
Jul 20, 2007
Messages
2,694
Reaction score
253
Location
Kodak
What state or country do you live in
Tennessee
Rating - 0%
0   0   0
Hi all,

I'm planning on setting up a 40 breeder or three on my system and I was wondering what your favorite inexpensive (hence, DIY) overflow is? I'm thinking about just making a box out of spare acrylic siliconed to the back of the tank and putting a durso and maybe an emergency drain in it as it doesn't have to look good, these tanks are all about function. :)

I'm wanting to drill the tank and keep the plumbing to a minimum, so I'm not looking for the crazy PVC siphon overflows, but wanted to see what other ideas you guys had. Surface skimming is a must and it needs to be at least quiet since we work in the garage a lot, but it doesn't have to be silent.

Thanks!

Brandon
 
The 700gph overflow from glass-holes is pretty cheap and work very well. I ran one on my 40 breeder for years.
 
Although it's not exactly what you're asking. I am adding two 40b's to my system for a frag tank and refugium and I plan to just go with glass holes for the overflow. I'd rather spend a few extra dollars for something I know works.
 
Thanks for the replies, guys. I should have clarified that I'm thinking under $10 or $20. I've used Glass Holes in the past and I love Mike's products, but I'd rather spend $30 for these tanks instead of $135. :)

Brandon
 
Thanks for the replies, guys. I should have clarified that I'm thinking under $10 or $20. I've used Glass Holes in the past and I love Mike's products, but I'd rather spend $30 for these tanks instead of $135. :)

Brandon

I hear you. Pleas post pictures once you figure out what you're going to do. I may follow your lead if it works out great
 
Will do!

Brandon
 
Cheapest would be to build your own overflow, Home Depot, Lowes, Menards... all those places have sheet acrylic you can use. That's what I did at first. Then you could even make a coast to coast and run your returns through it. It will cost you more time than money.
 
That's pretty much what I'm planning on, I'm just not 100% sure where I'm going to have the durso come out. I'm thinking I will probably just have a street ell in the overflow itself with an external durso. I ran my 45 tall like this back in the day. I'll have the overflow on one end of the tank and the return on the other so the water is flowing through it. Plus it makes it easier to plumb. :)

Brandon
 

IF YOU HAD TO TAKE A REEFING EXAM, WOULD YOU PASS?

  • Yes!

    Votes: 30 44.8%
  • Not yet, but I have one that I want to buy in mind!

    Votes: 9 13.4%
  • No.

    Votes: 25 37.3%
  • Other (please explain).

    Votes: 3 4.5%
Back
Top